Lexmark 101, 10E manual 1Turn off the printer, Initial Setup Complete appears on the display

Using a button combination (if you cannot read the current language)

1Turn off the printer.

Note: If you have set the Power Saver timeout in the Setup menu, then press and hold for three seconds to turn off the printer.

2From the printer control panel, press and hold and , and then press and release to turn the printer on.

Note: Do not release and until Language appears on the display, indicating that the printer has been reset.

3When prompted to set the initial settings of your printer, make your selections using the printer control panel buttons.

Initial Setup Complete appears on the display.

Using the printer control panel buttons and menus

18