3Create a name for the ad hoc network, and then click OK.
Note: Store the network name and password in a safe place for future reference.
Adding a printer to an existing ad hoc wireless network
Note: The printer can communicate on only one wireless network at a time. Configuring the printer for an ad hoc wireless network will remove it from any other wireless network, either ad hoc or infrastructure, for which it is configured.
For Windows users
1Click 
or Start.
2Click All Programs or Programs, and then select the printer program folder from the list.
3Select Printer Home.
4Click the Settings tab.
5Click Wireless setup utility link.
6Follow the instructions on the computer screen.
Note: Windows Vista computers may need to be reconnected to the ad hoc network after restarting.
For Macintosh users
1From the Finder desktop,
2
3Follow the instructions on the computer screen.
Configuring the printer wirelessly using WPS
If you want to use WPS to set up your printer, then insert the CD and follow the instructions on the computer screen.
Notes:
•To use WPS to configure the printer wirelessly, all of the devices on your wireless network must support WPS. If any device on your network does not support WPS, then you must type the SSID and security information when prompted.
•If you are using the PIN method to add your printer using WPS, make sure you type all eight digits when you are asked to enter your PIN.
Networking
69
