2From the printer control panel, press .

3Press the arrow buttons to scroll to Bluetooth Setup, and then press button .

4Press the arrow buttons to scroll to Security Level, and then press .

5Press the arrow buttons to select the security level, and then press .

Select Low to allow Bluetooth devices to connect and send print jobs to your printer without requiring users to enter a pass key.

Select High to require users to enter a four-digit numeric pass key on the Bluetooth device before connecting and sending print jobs to the printer.

6The Bluetooth Pass Key menu appears on the display if you set the security level to High. Press the arrow buttons to enter the four-digit pass key. Press each time you enter a number.

Printing from a Bluetooth-enabled device

Note: The printer does not support printing files from your computer using a Bluetooth connection.

1Insert a USB Bluetooth adapter into the USB port.

Bluetooth Dongle Connected appears on the display.

Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the USB Bluetooth adapter, or the printer in the areas shown while actively printing, reading, or writing from a Bluetooth-enabled device. A loss of data can occur.

Notes:

A Bluetooth adapter is not included with the printer.

Your printer automatically switches to Bluetooth mode when you insert a USB Bluetooth adapter.

2Make sure the printer is set up to receive Bluetooth connections. For more information, see “Setting up a connection between your printer and a Bluetooth-enabled device” on page 42.

3Set up the Bluetooth device to print to the printer. For more information, see the documentation for your Bluetooth device.

4See the documentation for your Bluetooth device to begin printing.

Note: If the Bluetooth Security Level on the printer is set to High, you must enter a pass key.

Printing

44

Page 44
Image 44
Lexmark 101, 10E manual Printing from a Bluetooth-enabled device