Lexmark 120 Complex page, ENA connection lost, Using the operator panels, Light sequence, Message

Using the operator panels

Complex page

Light sequence:

Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

Ready / Data—Blinks three times

Message:

The page may not print correctly because the print information on the page is too complex (that is, too large for printer memory).

Solution:

Primary light	Secondary light
sequence	sequence

Turn printer off and back on to try printing the page again. If not successful:

•Press to clear message and continue processing the job (some print data may be lost). To avoid this error in the future:

•Reduce complexity of the page by reducing the amount of text or graphics.

•Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).

ENA connection lost

Light sequence:

Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

Ready / Data—Blinks five times

Message:

During power-on cycle, the printer detected the connection to the external network adapter was lost.

Primary light	Secondary light
sequence	sequence

Note: This error is only detected during the power-on cycle.

Solution:

•Press to clear message.

•Re-establish connection with the external network adapter.

Overview of the Lexmark E120 operator panel

18