Lexmark 120 manual Using the operator panels Resource save off, Short paper

Using the operator panels

Resource save off

Light sequence:

•Continue—On

•Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

•Continue—On

•Ready / Data—Blinking

•Error—On

Message:

Too much memory has been allocated to the print buffer.

Primary light	Secondary light
sequence	sequence

Solution:

•Press to clear message and continue printing.

•Change the print buffer to a lesser amount, or set the print buffer to Auto (see Using the printer resident Web page on page 43).

Short paper

Light sequence:

•Continue—On

•Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

•Continue—On

•	Ready / Data—On	Primary light	Secondary light
•	Load / Remove Paper—On	sequence	sequence

•Error—On

Message:

Paper length is too short to print the formatted data. This occurs when the printer does not know the loaded media size or when there is a problem feeding the media.

Solution:

•Make sure the loaded print media is large enough and paper size is set correctly in the Local Printer Setup Utility paper size menu (see Software and Documentation CD).

•Press to clear message and continue the job.

•Press to cancel print job.

Overview of the Lexmark E120n operator panel

41