Using the operator panels

Insufficient collation area

Light sequence:

Error—On

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

Ready / Data—Blinks three times

Message:

Printer memory does not have the free space necessary to collate print job. May occur due to one of the errors listed below:

 

 

 

 

Primary light

Secondary light

sequence

sequence

Printer memory is full.

A page is too complex to print.

Memory is insufficient to save what is in the print buffer.

Solution:

Turn printer off and back on to try printing the page again. If not successful:

Press to clear message and continue processing the job (some print data may be lost). To avoid this error in the future:

Reduce complexity of the page by reducing the amount of text or graphics.

Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).

Load media

Light sequence:

Error—Blinking

Secondary light sequence:

Press twice quickly to see the secondary light sequence.

Ready / Data—Blinks once

Message:

Printer is out of media, or media did not feed properly.

Solution:

 

 

 

 

Primary light

Secondary light

sequence

sequence

Load media into Tray 1 or priority feeder and press to resume.

Ensure media is loaded correctly in Tray 1 or priority feeder.

Press to cancel print job.

Overview of the Lexmark E120 operator panel

19

Page 19
Image 19
Lexmark 120 manual Using the operator panels Insufficient collation area, Load media