Wiping the print cartridge nozzles and contacts

1Remove the print cartridges.

2Dampen a clean, lint-free cloth with water.

3Gently hold the cloth against the nozzles for about three seconds, and then wipe in the direction shown.

4Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and then wipe in the direction shown.

5With another clean section of the cloth, repeat step 3 and step 4.

6Let the nozzles and contacts dry completely.

7Reinsert the print cartridges.

8Print the document again.

9If the print quality does not improve, clean the print nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 38.

10Repeat step 9 up to two more times.

11If print quality is still not satisfactory, replace the print cartridges.

Maintaining the printer

39

Page 39
Image 39
Lexmark 2500 Series manual Wiping the print cartridge nozzles and contacts