3
Wait a few minutes for the driver information to be copied from the server computer to the client computer, and for a new printer object to be added to the Printers folder. The time this takes varies based on network traffic and other factors.
4Close Network Neighborhood.
5Print a test page to verify printer installation. a Click Start 
Settings 
Printers.
b Click File 
Properties.
c On the General tab, click Print Test Page.
When a test page prints successfully, printer installation is complete.
Setting up clients (peer-to-peer)
1Click Start 
Settings 
Printers.
2Click Add Printer to launch the Add Printer wizard.
3Click Network Print Server.
4Select the network printer from the Shared printers list. If the printer is not listed, type the path of the printer in the text box.
The path will look similar to the following: \\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it to the network. The shared printer name is the name assigned during the server installation process.
5Click OK.
Note: If this is a new printer, you may be prompted to install a printer driver. If no system
driver is available, then you will need to provide a path to available drivers.
6Select whether you want this printer to be the default printer for the client, and then click Finish.
7Print a test page to verify printer installation. a Click Start 
Settings 
Printers.
b Click File 
Properties.
c On the General tab, click Print Test Page.
When a test page prints successfully, printer installation is complete.
100
