This light sequence in |
|
advanced troubleshooting |
|
mode: | Corresponds to this setting: |
| For E320 and E322 printers, Parallel Strobe Adjust is set to Off (0), the |
| factory default. |
| This setting lets you increase the amount of time strobe is sampled to |
| determine that valid data is available on the parallel port. |
• Press the operator panel button with a brief button press to scroll through the settings (Off=0, On=+1, Auto=+2). Press the operator panel button with a long button press to select and save the On or Auto setting. As the setting is saved, all operator panel lights remain on for approximately 2 seconds
•Press the operator panel button with a double button press to scroll to the next menu item, USB Port Enabled.
Turn off the printer to exit the advanced troubleshooting mode.
USB Port Enabled is set to Auto, the factory default.
The Universal Serial Bus (USB) cable lets you connect a variety of devices to your computer with a single cable.
• Press the operator panel button with a brief button press to scroll through the settings (Off, On, Auto). Press the operator panel button with a long button press to select and save the Off or On setting. As the setting is saved, all operator panel lights remain on for approximately 2 seconds
• Press the operator panel button with a double button press to scroll to the next menu item, USB NPA Mode.
Turn off the printer to exit the advanced troubleshooting mode.
86
