This light sequence in |
| ||||
advanced troubleshooting |
| ||||
mode: | Corresponds to this setting: | ||||
|
|
|
|
| For E320 and E322 printers, Parallel Mode 1 is set to On, the factory |
|
|
|
|
| default. |
|
|
|
|
| This setting disables the |
|
|
|
|
| useful for computers that have open collector outputs on the parallel port |
|
|
|
|
| signals. |
|
|
|
|
| • Press the operator panel button with a double button press to scroll to |
|
|
|
|
| the next menu item, Parallel Mode 2. |
|
|
|
|
| • Turn off the printer to exit the advanced troubleshooting mode. |
For E320 and E322 printers, Parallel Mode 2 is set to On, the factory default.
This setting determines if the parallel port data is sampled on the leading or trailing edge of strobe. If Parallel Mode 2 is set to On, the parallel port data is sampled on the leading edge of strobe. The parallel port data is sampled on the trailing edge of strobe if Parallel Mode 2 is set to Off.
• Press the operator panel button with a brief button press to scroll through the settings (On, Off). To turn off this setting, press the operator panel button with a long button press to select and save the Off setting. As the setting is saved, all operator panel lights remain on for approximately 2 seconds
•Press the operator panel button with a double button press to scroll to the next menu item, Parallel Strobe Adjust.
Turn off the printer to exit the advanced troubleshooting mode.
85
