What this light sequence means:
The printer is ready to receive and process data.
What you can do:
•Send a print job.
•Print a test page by pushing the operator panel button with a brief button press.
•Cancel the job. Push the operator panel button until all the lights come on to reset the printer.
What this light sequence means:
The printer is ready to receive and process data. In addition, the toner in the print cartridge is getting low.
What you can do:
•Send a print job.
•Print a test page by pushing the operator panel button with a brief button press.
•Remove the print cartridge and shake it to extend the life of the cartridge.
•Replace the print cartridge.
•Cancel the job. Push the operator panel until all the lights come on to reset the printer.
Note: The Toner Low light does not come on if the standard
55
