Lexmark 24T7406, MX711DTHE, MX710DE, MX711DE Parallel x menu, Understanding the printer menus 171

Understanding the printer menus		171
	Use	To
	USB Buffer	Set the size of the USB input buffer.
	Disabled	Notes:
	Auto
		• Auto is the factory default setting.
	3K to [maximum size allowed]
		• Disabled turns off job buffering. Any jobs already buffered on the printer hard
		disk are printed before normal processing resumes.
		• The USB buffer size value can be changed in 1-K increments.
		• The maximum size allowed depends on the amount of memory in the printer,
		the size of the other link buffers, and whether Resource Save is set to On or
		Off.
		• To increase the maximum size range for the USB Buffer, disable or reduce the
		size of the parallel, serial, and network buffers.
		• The printer automatically restarts when the setting is changed from the printer
		control panel. The menu selection is then updated.
	Job Buffering	Temporarily store print jobs in the printer hard disk before printing.
	Off	Notes:
	On
		• Off is the factory default setting.
	Auto
		• On buffers jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Mac Binary PS	Set the printer to process Macintosh binary PostScript print jobs.
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• On processes raw binary PostScript print jobs.
		• Off filters print jobs using the standard protocol.
	ENA Address	Set the network address information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Set the netmask information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Set the gateway information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.

Parallel [x] menu

Note: This menu appears only when an optional parallel card is installed.