Lexmark MX710DE, MX711DTHE, MX711DE manual Set Date/Time menu, Understanding the printer menus 181

Understanding the printer menus		181
	Use	To
	Delete Log	Specify whether or not audit logs are deleted.
	Yes	Note: Yes is the factory default setting.
	No
	Configure Log	Specify how and whether or not audit logs are created.
	Enable Audit	Notes:
	Yes
		• Enable Audit determines if events are recorded in the secure audit log and
	No
		remote syslog. No is the factory default setting.
	Enable Remote Syslog
		• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
		factory default setting.
	Yes
		• Remote Syslog Facility determines the value used to send logs to the remote
	Remote Syslog Facility
		syslog server. 4 is the factory default setting.
	0–23
		• If the security audit log is activated, then the severity value of each event is
	Severity of events to log
		recorded. 4 is the factory default setting.
	0–7
Set Date/Time menu
	Use	To
	Current Date and Time	View the current date and time settings for the printer.
	Manually Set Date and Time	Enter the date and time.
		Note: Date/Time is set in YYYY-MM-DD HH:MM:SS format.
	Time Zone	Select the time zone.
		Note: GMT is the factory default setting.
	Automatically Observe DST	Set the printer to use the applicable daylight saving time (DST) start and end times
	On	associated with the printer Time Zone setting.
	Off	Note: On is the factory default setting and uses the applicable Daylight Saving Time
		associated with the Time Zone setting.
	Custom Time Zone Setup	Enable the user to set up the time zone.
	DST Start Week
	DST Start Day
	DST Start Month
	DST Start Time
	DST End Week
	DST End Day
	DST End Month
	DST End Time
	DST Offset
	Enable NTP	Enable Network Time Protocol, which synchronizes the clocks of devices on a
	On	network.
	Off	Note: On is the factory default setting.
	NTP Server	View the NTP server address.