Lexmark MX711DTHE Print Settings, Understanding the printer menus 216, Copies, Duplex Binding

Understanding the printer menus				216
	Use		To
	Scan edge to edge		Specify whether the original document is scanned edge-to-edge.
	Off		Note: Off is the factory default setting.
	On
	Sharpness		Adjust the amount of sharpness on a scanned image.
	1–5		Note: 3 is the factory default setting.
	Temperature		Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
	‑4 to 4		output than the default while “warm” values generate a redder output than the
			default.
Print Settings
	Use	To
	Copies	Specify a default number of copies for each print job.
	1–999	Note: 1 is the factory default setting.
	Paper Source	Set a default paper source for all print jobs.
	Tray [x]	Note: Tray 1 is the factory default setting.
	Multipurpose Feeder
	Manual Paper
	Manual Envelope
	Collate	Stack the pages of a print job in sequence when printing multiple copies.
(1,1,1) (2,2,2)		Note: “(1,2,3) (1,2,3)” is the factory default setting.
(1,2,3) (1,2,3)
	Sides (Duplex)	Specify whether prints are on one side or on both sides of the page.
	1 sided	Note: “1 sided” is the factory default setting.
	2 sided
	Duplex Binding	Define binding for duplexed pages in relation to page orientation.
	Long Edge	Notes:

Short Edge

•Long Edge sets binding along the long edge of the page (left edge for portrait and top edge for landscape). This is the factory default setting.

•Short Edge sets binding along the short edge of the page (top edge for portrait and left edge for landscape).

Paper Saver Orientation Specify the orientation of a multiple‑page document.
Auto	Notes:
Landscape
	• Auto is the factory default setting.
Portrait
	• This setting affects jobs if the value of the Paper Saver setting in the same menu is not set
	to Off.