Liebert 130 kVA

User Manual

Hipulse - Single Phase ‘1+N’ UPS System 130 kVA - 110V

Rev. No. Revision details Date

IMPORTANT

This manual contains information concerning the installation, operation and

maintenance of the Hipulse Uninterruptible Power System (UPS) for the single module

and one plus one Systems.

All relevant parts of the manual should be read prior to commencing installation.

The UPS must be commissioned by an engineer approved by the manufacturer (or his

agent) before being put into service. Failure to observe this condition will invalidate

any implied warranty.

The Hipulse UPS has been designed for Commercial / Industrial use only.

The Hipulse has not been designed for direct use in any life support application.

If you encounter any problem with the procedures contained in this manual you should

seek immediate assistance from Emerson Network Power (India) Pvt. Ltd. Sales Office

from whom the equipment was purchased. Alternatively contact the Emerson

Network Power (India) Pvt. Ltd Customer Service & Support department at the

address shown below:

EMERSON NETWORK POWER (INDIA) PRIVATE LIMITED

Plot No. C-20, Road No. 19

Wagle Industrial Estate

Thane – 400 604, INDIA

Phone : (00 91 22) 25807000

25828405

Fax : (00 91 22) 25800829

25828358

Emerson Network Power (India) Private Limited pursues a policy of continual product

development and reserves the right to change the equipment without notice.

Unauthorized reproduction prohibited