User Manual
Hipulse - Single Phase ‘1+N’ UPS System | 130 kVA - 110V |
5.9Procedure to completely switch ON/ OFF the UPS at the UPS Display Control Panel:
MEASUREMENT
>FUNCTION<
MAINTENANCE SETUP
− WRITE | SAVE ↵ |
↓MOVE | EXIT ESC |
ENTER PASSWORD
00000000
BATTERY TEST |
|
GENERATOR |
|
PANEL SETUP |
|
>NEXT PAGE | < |
MODEM CONNECTION >ON/OFF UPS CONTROL <
RELOAD UPS DATA RESET BUFFERS
1.From the Default window, press the ENTER key: the Main Menu window will display:
2.Select FUNCTION and press ENTER key:
Before being allowed into the FUNCTION windows you are requested to enter a password. This is achieved by pressing the UP arrow key repeatedly until the first digit displays the character required, you then press the DOWN arrow key once to move on to the second digit. This action is repeated for all eight digits. When the PASSWORD has been completed press the ENTER key.
CAUTION
This operation gives the operator access to modify UPS's operating mode, it is advised that only trained qualified personnel should attempt to do that.
3. You have now access to all function windows.
Press the DOWN arrow key until the cursors have selected NEXT PAGE – press the enter key.
4.Press the DOWN arrow key until the cursors have selected ON/OFF UPS CONTROL.
Press the enter key.
CAUTION
>INVERTER OFF | < | |
BYPASS |
| ON |
RECTIFIER |
| ON |
RECTIFIER | MAN | |
|
|
|
|
|
|
−ROTATE | START | ↵ |
| EXIT | ESC |
INVERTER |
| ON |
|
|
|
The following window allows the operator to select the UPS inverter ON or OFF, select the rectifier ON or OFF, select the rectifier to manual or float voltage and a switch OFF the line (bypass) voltage to the load.
IF YOU ARE NOT SURE WHAT YOU ARE DOING,
THEN DO NOT DO IT.
NORMAL OPERATION:
5a. Ensure INVERTER is selected by the cursors and press the ENTER key.
41
