Lifescan SPD2410BD manual E C K

1. Press the blue power button to turn on the meter. The display check appears briefly. Carefully check that all symbols appear. Make sure a test strip is not in the meter when you turn it on.

2. Compare the code number on the meter

display with the code number on the test strip vial. If they do not match, press the green C button until the codes match.

	Green C Button
	▼
I N G	(Example)
C H E C K

3. Remove a test strip from the vial and replace the vial cap. Close it tightly.

◆Check the expiration date and discard date. Do not use the test strips after these dates.

◆Compare the colour of the confirmation dot on the test strip with the “Unused” colour dot shown on the Colour Chart on the test strip vial label. If the colour of the confirmation dot on the test strip is darker than that shown on the Colour Chart, do not use the test strip. The result may be inaccurate.

16