Lifescan SPD2410BD manual Day Test Averages, Meter is preset to, Mode

In set–up mode, a three–tone beep sounds and the following symbol flashes when you move to the beep signals feature.

To operate without beep sig- nals, press the green C but- ton. The following display will appear.

You will hear a three–tone beep when OFF is displayed. Press the blue power button to move to the 14– and 30–day

test averages setting.

14– and 30–Day Test Averages

The meter is preset to

display 14–day and 30–day averages of your blood glucose results in memory

mode.

For accurate 14–day and 30–day blood glucose averages, you must mark control solution test results by pressing the green C button again while the glucose level is displayed. This will keep them from being included in your blood glucose test averages. If you wish to turn the

averages off, press the green button. The following display will appear:

No averages will be displayed in memory mode. Press the blue power button to move to the time format setting.

S E T T I N G S

63