T E S T I N G

Test Procedures

1. Remove the lancing device cap. Insert a lancet into the lancet holder. Push down firmly until the lancet is seated in the lancet holder.

CAUTION: Only one person should use the lancing device.

2. Carefully remove the lancet’s protective cover. Replace the lancing device’s cap.

CAUTION: Never share a lancet with another person. Lancets are for single use only. Always use a new, sterile lancet.

24

Page 32 Page 34
Page 33
Image 33
Lifescan SPD2410BD manual Test Procedures
Page 32 Page 34
Top Page Image Contents