Lifescan SPD2410BD manual D I N G T H E M E T E R

R E N C E

C O D I N G T H E M E T E R

Before testing, make sure the meter is coded correctly.

P E R F O R M I N G A T E S T

Q U I C K R E F E

1Press blue power button to turn on meter. Make

sure a test strip is not in the meter when you turn it on.

(Example)

3. . . and then the code number is displayed

afterward.

2The meter automatical- ly displays the last test

result with the date. . .

Green C Button

→

(Example)

4Compare the code number on the meter to

the code number on the test strip vial. If the code num- bers do not match, press the green C button until the code number on the meter matches the code number on the test strip vial.

1 Press blue power button to turn on meter. Make

sure a test strip is not in the meter when you turn it on.

3 Check confirmation dot on back of test strip and

make sure it is completely blue.

2 Apply blood to the centre of the pink test

square. Never add a second drop of blood.

4 Firmly push the test strip into the test strip

holder, with the tapered-end first and the confirmation dot facing down, until it stops. Read result. Do not remove strip until count- down is complete.

70