Caring for your Meter

General Care

◆Keep your meter dry and avoid exposing it to extremes in temperature. Do not store your meter or test strips in your car or in the refrigerator or freezer.

◆Dropping the meter can damage the electronics. If you drop your meter, do a control solution test (see Checking the System) and a display segment check (see Display Symbols) before using the meter to test your blood.

◆Do not take the meter apart. Sensitive parts could be damaged causing inaccu- rate results. Taking the meter apart will also void your warranty.

Cleaning the Meter

C AU T I O N :

◆Use water to clean the meter.

◆Do not get water inside the meter case.

◆Never immerse the meter or hold it under running water.

◆Do not use alcohol, glass cleaners, or any other cleansers to clean the test strip holder or lens area.

N OT E : For Healthcare Professionals or caregivers who assist multiple users, to disinfect the meter, cleanse the meter as described below using a 10% bleach solu- tion (9 parts water, 1 part bleach) and then clean again with water to remove any remaining bleach. Thoroughly dry the meter. Failure to remove the excess bleach may result in an error message ( , ) or an inaccurately high result.