than the “19.4 mmol/L” sample colour dot, your glucose level is very high.

CAUTION: The Sample colour dots are only approximate. They should be used only as a guide in the event you get an error message instead of a numerical result. They can give you an indication of whether your glucose is very low 2.8 mmol/ L (50 mg/dL) or very high 19.4 mmol/ L (350 mg/dL) while you troubleshoot the error mes- sage. Results obtained using the sample colour dots are not a replace- ment for a OneTouch® SureStep® meter test result. Do not use Colour Chart to verify control solution tests.

13. Record your test result in your logbook.

If a test result falls outside of the target range that you and your Healthcare Professional have established and you

cannot link it to diet, exercise, medica- tion, or stress, repeat the test.

14. Remove and discard the test strip.

15. Turn off the meter by pressing the blue power button. The meter automatically turns off 3 minutes after it displays your test result.

16. Remove the lancing device cap.

Removing Lancing Device Cap

T E S T I N G

33

Page 42
Image 42
Lifescan SPD2410BD manual Record your test result in your logbook