Lifescan SPD2410BD manual Setting the Time, Setting the Year

S E T T I N G S

Setting the Time

To set the time, enter the set-up mode as described in “Entering Set-Up Mode” above. The time appears with the hour flashing.

Press and release the green C button to advance 1 hour. To move faster, hold down the green C button. With the correct hour on the display, press and release the blue power button and the minutes will start flashing.

Press and release the green C button to advance 1 minute. To move faster, hold the green C button down. With the correct min- utes on the display, press the blue power button and the year setting will appear on the display.

AM

N o t e : Calculated 14–day and 30–day aver- ages may change if you change the date and time. The averages are calculated from glucose results measured during the 14 or

30 days preceding the current date and time settings.

Setting the Year

With the year on the display, press and release the green C button to advance 1 year. To move faster, hold down the green C button. With the correct year on the display, press and release the blue power button and the month and day will appear on the screen with the month segment flashing (month/day format is preset).

60