4Enter your operator ID either
by pressing the touch screen or using the barcode scanner. Refer to page 8 for information on scanning a barcode.
Depending on the configuration option setting, you may or may not be required to enter your operator ID.
If your operator ID is required, a configuration option may be set to remember your ID for up to 1 hour after the bedside unit is turned off. If your ID appears at the operator ID screen, press Ok to confirm it is correct. If the ID is not correct, simply enter your ID and it will replace the existing ID.
5Enter the patient’s ID, either
by pressing the touch screen or using the barcode scanner.
■ NOTE
Carefully enter the ID. An accurate patient ID is imperative for transferring the correct results to the medical record.
31
