Lincoln Electric SVM138-A service manual GUN and Cable Assemblies, Wire Feeder Accessories

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

C-5		C-5
	ACCESSORIES
	GUN AND CABLE ASSEMBLIES
	A variety of standard Lincoln and Magnum gun and	10 ft., 12 ft. and 15 ft. cable lengths. Choose the gun
	cable assemblies are available for the LN-9 GMA in	and cable assembly to suit the LN-9 GMA welding
		application and wire size. See Table C-1.

TABLE C.1 – LN-9 GMA GUN AND CABLE ASSEMBLIES

			60% Duty
Process	Model	Electrode	Rating
Gas Metal Arc (GMA)	K426	.035-.052” (0.9-1.3 mm) solid	350 amps
		.045-5⁄64” (1.1-2.0 mm) cored	350 amps
	K427	.045-1⁄16” (1.1-1.6 mm) solid	500 amps
		1⁄16-5⁄64” (1.6-2.0 mm) cored	500 amps
	Magnum K470(1)	.035-1⁄16” (0.9-1.6 mm) solid	300 amps
		.035-5⁄64” (0.9-2.0 mm) cored	300 amps
	Magnum K471(1)	.035-1⁄16” (0.9-1.6 mm) solid	400 amps
		.035-5⁄64” (0.9-2.0 mm) cored	400 amps
	Magnum K478(2)	.035-1⁄16” (0.9-1.6 mm) solid	300 amps
		.035-5⁄64” (0.9-2.0 mm) cored	300 amps
	Magnum K479(2)	.035-1⁄16” (0.9-1.6 mm) solid	400 amps
		0.35-5⁄64” (0.9-2.0 mm) cored	400 amps
Innershield®	K126	.068-5⁄64” (1.7-2.0 mm) Innershield	350 amps
	K115	5⁄64” (2.0 mm) lnnershield	450 amps
	K206(3)	.068-5⁄64” (1.7-2.0 mm) Innershield	350 amps
	K289(3)	5⁄64” (2.0 mm) lnnershield	500 amps
	K309(3)	.068-5⁄64” (1.7-2.0 mm) lnnershield	250 amps
Submerged Arc	K112	1⁄16” (1.6 mm) Solid	500 amps

(1)K466-1 connector kit required.

(2)K489 Fast-Mate™ Adapter required.

(3)Linconditioner™ guns are recommended for locations where smoke accumulation is a problem and conven- tional exhaust systems are ineffective. The available smoke removal type Innershield guns and vacuum units can be used in these locations. Instructions are shipped with the equipment.

Return to Section TOC

Return to Master TOC

WIRE FEEDER ACCESSORIES

BURNBACK TIMER KIT (K419)

Provides a precise control of the electrode burnback at the end of the weld. Prevents crater sticking and provides proper stickout for starting the next weld.

Recommended especially when welding with small (0.023-1/16") diameter wire at high wire feed speeds. Also includes a cold inch switch. (Can be installed only in GMA models.)

Install the kit according to the M15060 instructions included with the kit.

LN-9 GMA Wire Feeder