Lincoln Electric SVM185-A Recommended Processes, Equipment Limitations, Recommended Power Sources

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

B-4 OPERATION B-4

RECOMMENDED PROCESSES

•GMAW (CV, Synergic CV, Pulse, STT™, Power, Pulse on Pulse™, Push-Pull)

•FCAW

•SMAW

•GTAW (Lift Start only)

•Solid wires .025" to 1/16"

•Cored wires .035" to 5/64"

•Cored wires .035" to 3/32" when configured for "extra torque"

EQUIPMENT LIMITATIONS

•Works only on ArcLink® or LincNet™ Power Wave® power sources.

•When operating on LincNet™ power sources, not all features are available.

•Maximum gun length is 25ft.(7.6m) for push-only sys- tems.

•Maximum gun length is 50ft.(15.2m) for push-pull systems.

•Spool guns do not work with the POWER FEED® 25M.

•A remote control/foot amptrol and a push-pull gun may not be connected to the POWER FEED® 25M simultaneously.

•Maximum spool size is 12 in. (305 mm) diameter

•Maximum spool weight is 44 lb (20 kg).

•Maximum control cable length is 200 ft (61 m).

•Other gun bushings are required for welding guns that do not have a Magnum® (Tweco #2-#4 compati- ble) back end.

•No more than 2 wire feeders may be connected to one ArcLink® power source at a time.

RECOMMENDED POWER SOURCES

•Power Wave® 355M

•Power Wave® 455M

•Power Wave® 455M/STT

•Power Wave® 655/R

POWER FEED® 25M