OPERATION | ||
DEFINITION OF WELDING TERMS | GENERAL DESCRIPTION |
|
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
•A
SYNERGIC WELDING MODES
•A Synergic welding mode offers the simplicity of sin- gle knob control. The machine will select the correct voltage and amperage based on the wire feed speed (WFS) set by the operator.
WFS
• Wire Feed Speed
CC
•Constant Current
CV
•Constant Voltage
GMAW
• Gas Metal Arc welding
•Gas Metal Arc
•Gas Metal Arc
SMAW
•Shielded Metal Arc welding
FCAW
•Flux Core Arc Welding
CAC
•Carbon Arc Cutting
CAG
•Carbon Arc Gouging
General Physical Description
The POWER FEED® 25M is a premium portable wire feeder for use with the Power Wave products. The wire feeder features a 2 roll MAXtrac™ drive coupled to a powerful motor for driving wire through difficult situa- tions. The
The heart of the POWER FEED® 25M is the MAXtrac™ drive. The patented features on the wire drive offer
The POWER FEED® 25M continues Lincoln’s lead role of environmental protection for electronics. P.C. boards are potted in epoxy and electrical connections are protected with dielectric grease. Noise suppres- sion components protect the POWER FEED® 25M from stray signals and keep the feeder from interfering with other digital equipment.
General Functional Description
The POWER FEED® 25M is best suited for applica- tions were quality welds are expected. Combined with a Power Wave power source, the POWER FEED® 25M is great for aluminum, nickel, alloy and other difficult to weld materials. Easy to use controls make it a great feeder for consistent results with mild steel applications too.
DUTY CYCLE
The POWER FEED® 25M is rated for 500 amps, 60% duty cycle and 400 amps, 100% duty cycle. The duty cycle is based on a 10 minute cycle.
For example, when welding at 500 amps, the POWER FEED® 25M may run 6 minutes and must idle for 4 minutes.
