Minolta Di620 manual Small Originals, Number Position, 4in1 Copy Order, Date Printing Format

				4-17
					5. User's Choice
	3/6
Realign Warning		Date Printing Position
Select whether to give (“ON”) a warning message		Enter the position at which to print the date by X
or not (“OFF”) when the original is placed out-of-		and Y using the	or		keys. The
alignment on the Glass.		dimension can range from 3/16″ ~1-9/16″.
The initial setting is “OFF.”		The initial setting is X: 1/4″, Y: 3/4″.

“Small” Originals

Select whether to enable (“ON”) a copy cycle or not (“OFF”) when it is initiated by pressing the Start key with no originals placed on the Original Glass or with an original smaller than the detectable size placed on the Glass in the Auto Paper mode.

If this function is turned “ON,” the copy cycle is run using the paper loaded in the default paper source. If turned “OFF,” a warning message appears to instruct the user to select the paper.

The initial setting is “ON.”

Page Number Position

Enter the position at which to print the page

number using the or keys. It can range from 3/16″ ~1-9/16″. from the bottom of the page.

The initial setting is 1/4″.

Chapter 4

4in1 Copy Order

Select the default copying order in the 4-in-1 mode from among the following two:

	1	2	1		3
	3	4	2		4
				1	2
The initial setting is				3	4	.

Date Printing Format

Select the format for date printing, i.e., “punctuation,” “date format,” and “year.”

•“Punctuation” can be either XX/XX/XX or XX.XX.XX.

The initial setting is XX/XX/XX.

•“Date Format” can be either '98/12/27, 12/27/'98, DEC/27/'98, 27/12/'98, or 27/DEC/'98.

The initial setting is '98/12/27.

•“Year” can be either ’yy or yyyy.

The initial setting is ’yy.

Using the Utility Mode