Mio H610 Using Your Device in a Vehicle, Using the Device Holder, Connecting the In-Car Charger

1.4 Using Your Device in a Vehicle

Using the Device Holder

CAUTION:

Select an appropriate location for the device holder. Never place the holder where the driver’s field of vision is blocked.

If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable. (Cars with an anti-jam window design may automatically leave adequate space as needed.)

Use the device holder to mount your device in a vehicle. Make sure that the GPS antenna has a clear view of the sky. (See the Quick Start Guide supplied with the device for the installation instruction.)

NOTE: Depending upon the specific model purchased, the device holder supplied with your device may not look exactly the same as the picture shown.

Connecting the In-Car Charger

The in-car charger supplies power to your device when you are using the device in a car.

CAUTION: To protect your device against sudden surges in current, connect the in-car charger only after the car engine has started.

1.Connect one end of the in-car charger to the power connector of your device.

2.Connect the other end to the 12-volt cigarette lighter or power port to power and charge your device. The indicator light on the in-car charger lights in green to indicate that power is being supplied to your device.

8