Mitsubishi DS5000TK DS5000 Memory Control Register, LabelMCON Register Address 0C6H, RA32/8, ECE2

									USER'S GUIDE
DS5000 MEMORY CONTROL REGISTER
Label:MCON							Register Address: 0C6H
D7	D6		D5		D4	D3	D2	D1	D0
PA3	PA2		PA1		PA0	RA32/8	ECE2	PAA	SL
Bit Description:
MCON.7±4:		PA3±0
ªPartition Addressº:		Used to select the starting address of Data Memory on the Byte±wide bus.
		Program space lies below the partition address.
		PA3		PA2	PA1	PA0	Partition Address
		0		0	0	0	0000H
		0		0	0	1	0800H
		0		0	1	0	1000H
		0		0	1	1	1800H
		0		1	0	0	2000H
		0		1	0	1	2800H
		0		1	1	0	3000H
		0		1	1	1	3800H
		1		0	0	0	4000H
		1		0	0	1	4800H
		1		0	1	0	5000H
		1		0	1	1	5800H
		1		1	0	0	6000H
		1		1	0	1	6800H
		1		1	1	0	7000H*
		1		1	1	1	8000H*

*A 4K byte increment (not 2K bytes) in the Partition Address takes place between bit field values 1110B and 111B.

Initialization:	Set to all 1's on a No VLI Power On Reset or when the Security Lock bit is
	cleared to a 0 from previous 1 state. These bits are also set to all 1's when
	any attempt is made to have them cleared to all 0's with the SL bit set to 1
	(illegal condition).
Read Access:	May be read anytime.
Write Access:	PAA bit must = 1 in order to write PA3±0. Timed Access is not required to
	write to PA3±0 once PAA=1.
MCON.3:	RA32/8
ªRange Addressº:	Set the maximum usable address in on the Byte±wide bus.
	RA32/8=0 sets Range Address = 1FFFH (8K)
	RA32/8=1 sets Range Address = 7FFFH (32K)
Initialization:	Set to a 1 during a No VLI Power On Reset and when the Security Lock bit
	(SL) is cleared to a 0 from a previous 1 state. Remains unchanged on all oth-
	er types of resets.
	050396 38/173

39