Mitsubishi Electronics DX-TL1600EM operation manual Setting the present time, Daylight saving

4)The <COPY SELECTION> menu (press the COPY button to display the menu).

<COPY SELECTION>￿
@COPY DIRECTION HDD}COPY￿
OVERWRITE		OFF￿
TRANSFER PERIOD		MAN￿
FROM:06-09-01	18:43:52￿
TO:06-10-01	18:43:52￿
EXECUTE		OFF

Refer to “Menu functions” on pages 22 - 24 for the construction of the menus.

♦Setting the present time

Please follow steps below to set the present time.

Example: Setting the present time to 6:30 p.m., March 15, 2001.

1.Press the SET UP button.

•The <MENU SETTING > menu will appear.

<MENU SETTING>￿

@TIME DATE DISPLAY￿ MPX DISPLAY￿ TIMER PROGRAM

7.Turn the SHUTTLE ring to the left to accept the setting.

•The seconds value is reset to “00”, and the display will return to the <INITIAL SET UP> menu.

♦The daylight saving

The clock is put forward one hour by setting the menu. The default setting for this function is “OUT”. On the DAYLIGHT SAVING in <TIME DATE ADJUST > menu, turn the JOG dial to flash “IN” (the daylight saving function is activating) and turn the SHUTTLE ring to the right to enter the selection.

♦Present time display

The following display will appear when this unit is turned on. (When the DISPLAY MODE is set to “3”.)

Day of

Date Month Year the week Alarm recording number

01-01-2001 MON A0001

00:00:00			25F	50% C01
Time	Second			Camera number
				Recorded capacity of the Hard Disk
	Minute
			Recording interval
		Non-operation camera mark

ENGLISH

2.Turn the JOG dial to select the INITIAL SET UP, and turn the SHUTTLE ring to the right.

•The <INITIAL SET UP> menu will appear.

<INITIAL SET UP>￿
@TIME DATE ADJUST￿	STOP￿
HDD FULL￿
HDD PB REPEAT￿	STOP￿
ARCHIVE OVERWRITE￿	OFF￿
AUTO EJECT￿	ON

3.Confirm that the cursor is next to the TIME DATE ADJUST, and turn the SHUTTLE ring to the right.

•The <TIME DATE ADJUST> menu will appear.

Refer to “Setting Display Mode” on page 25 for detailed settings of the display.

Alarm recording number will be displayed during alarm recording.

If a picture of the camera which is not set to be operated is displayed on the screen, Non-operation

Camera mark will be shown on the present time dis- play.

4.Turn the SHUTTLE ring to the right twice.

•The sub-item of DATE will start flashing.

<TIME DATE ADJUST>￿	OUT￿
DAYLIGHT SAVING
DATE	01￿
MONTH	01￿
YEAR	2000

5.Turn the JOG dial to set the date number to 15, and turn the SHUTTLE ring to the right.

•The sub-item of MONTH will start flashing.

<TIME DATE ADJUST>￿	OUT￿
DAYLIGHT SAVING
DATE	15￿
MONTH	01￿
YEAR	2000

6.Set the month, year, hour, 10 minute digit and minute digit in a similar fashion.

•Seconds cannot be set.

•The sub-item of DAYLIGHT SAVING will flash when you turn the SHUTTLE ring to the right after setting the minute.

<TIME DATE ADJUST>￿
DAYLIGHT SAVING	OUT￿
DATE	15￿
MONTH	03￿
YEAR	2001￿
TIME	18:30:00￿
￿
TURN THE SHUTTLE RING￿
< < TO EXECUTE.

The amount of space used in the total HDD in- cluding external devices is displayed during record- ing. When recording is stopped, this figure will not be displayed. (It will stay displayed during PAUSE.) When recording is started again, this figure will ap- pear again after a few moments.

INFORMATION

This unit has a four-digit year dis- play. It can display dates from January 1, 2000 to

December 31, 2030. It also has a built-in function to automatically calculate leap years. After December 31, 2030, the date indicator will return to 2000.

INFORMATION

The on-screen clock can be reset to the nearest hour, by applying a signal to the

CLOCK ADJ terminal. For example, if the current time is 11:29:59, it will be reset to 11:00:00, and if the current time is 11:30:00, it will be reset to 12:00:00.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic Operations

11