■Basic playback
The recorded image can be played back in various ways. In this Basic Operations, the most basic playback function is explained. Refer to the pages shown below for the other playback functions.
Please refer to page 56 for Various playback functions.
1.Turn on the power of the connected peripheral recording device , then turn this unit on.
2.Select the playback device.
•Press the PLAY DEVICE button on the front panel to select the playback device. The indicator of the selected device will illuminate. (The indicator will not switch when a peripheral recording device is not connected.)
PLAY DEVICE
3.Press the PLAY button.
•After displaying a paused image, playback will begin.
•The oldest recording will be played back when pressing the PLAY button for the first time after the power is turned on or the recording is finished. If you want to playback the newest recorded data, press the REV PLAY button before pressing the PLAY button after finishing recording.
4.Press the PAUSE button to pause playback.
•Press the PAUSE button again to resume playback.
5.Press the STOP button to stop playback.
INFORMATION | When recording with more than |
|
one camera, the playback interval per camera will be the time that multiplies the recording interval by the number of the cameras.
■Basic searching function
This unit has various functions for searching a specific point. The following explains time date search. By using this function, you can search for a specified point of the data by setting the selected camera number, date, hour, and minutes. Refer to pages 57 - 59 for the other search- ing functions.
♦Time date search
Example: To search a recording which was made on May 17 2001, 9:25:40 p.m. by the camera number 3.
1.Press the SEARCH button to display the <SEARCH SELECTION> menu.
<SEARCH SELECTION> @SELECTION CAMERA NO.ALL TIME DATE SEARCH INDEX SEARCH
SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
2.Make sure that the cursor ( 
) is set to the <SELECTION CAMERA NO.> menu, and turn the SHUTTLE ring to the right.
•The sub-item of <SELECTION CAMERA NO.> will start flashing.
<SEARCH SELECTION> @SELECTION CAMERA NO.ALL TIME DATE SEARCH INDEX SEARCH
SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
3.Turn the JOG dial to display “ 3” then turn the SHUTTLE ring to the right.
• The flashing will stop.
<SEARCH SELECTION> @SELECTION CAMERA NO. 3
TIME DATE SEARCH INDEX SEARCH SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
By turn the JOG dial, the selec- tion camera number will be changed as below :
ALL 
Q
W
E
R
T
Y
U
r
e
w
q
}
{
P
O
I
4.Turn the JOG dial to select the TIME DATE SEARCH, and turn the SHUTTLE ring to the right.
•The <TIME DATE SEARCH> menu will appear and the date number will start flashing.
<TIME DATE SEARCH> | 3 |
| |
| |
| |
EXECUTE OFF |
|
To exit the <TIME DATE SEARCH> menu with- out activating the search, press the SEARCH but-
ton on the front of the unit.
5.Turn the JOG dial to set the date number to 17.
•Turn the SHUTTLE ring to the right. The next item will start flashing.
<TIME DATE SEARCH> | 3 |
|
EXECUTE OFF
6.Set the month, year, hour, minutes and seconds digit in a similar fashion.
•The
<TIME DATE SEARCH> | 3 |
EXECUTE OFF
ENGLISH |
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Basic Operations |
15
