Mitsubishi Electronics DX-TL1600EM DET setting, Selection camera no, CH. motion detection setting

Various recording settings (continued)

All the camera channels set in the Alarm Re- cording’s DEFINE GROUP SETTING are used for

the Pre-alarm Recording camera channels, even if, for example, the SEP is selected in the RECORD ALARM setting.

♦M-DET setting

These settings are used to make adjustments to the MO- TION DETECTION function, which initiates Alarm Record- ing when movement is detected within the images captured by the cameras. To setup the M-DET SETTING, first turn the MOTION DETECTION setting “ON” in the <INITIAL SET UP> menu. The M-DET SETTING screen will not be displayed when this setting is “OFF”. Please refer to <INITIAL SET UP> menu, MOTION DETECTION setting on page 32.

1.Press the SET UP button to display the <MENU SETTING> menu.

2.Turn the JOG dial to select the A-REC/M-DET SETTING and turn the SHUTTLE ring to the right.

•The <A-REC/M-DET SETTING> menu will appear.

<A-REC/M-DET SETTING>￿

@IMAGE QUALITY	HIGH￿
MAX REC FIELDS	12.5F ￿
DEFINE GROUP SETTING￿
A-REC DURATION	15S￿
RECORD ALARM	SEP ￿
PRE A-REC	OFF￿
￿
M-DET SETTING

3.Turn the JOG dial to select the M-DET SETTING and turn the SHUTTLE ring to the right.

•The <MOTION> menu will appear.

<MOTION>￿	CAMERA NO.
@SELECTION		1
￿	DETECTION	OFF
CH.MOTION
SET DETECTION MASK￿		MED￿
SENSITIVITY
MOTION THRESHOLD		2
TEST MODE		OFF

When the MOTION DETECTION setting in the INITIAL SET UP menu is turned ON, the MAX REC

FIELDS for each time setting will be automatically

altered as follows. These settings will not auto- matically revert to their former values even if MOTION DETECTION is turned OFF.

Case of <NORMAL REC SETTING> menu and <A- REC/M-DET SETTING> menu.

“25F” } “12.5F”, “8.33F” } “6.25F” , “5F” } “4.17F”

Case of “MODE” in the <TIMER PROGRAM> menu. “25” } “12.5”, “8.33” } “6.25” , “5” } “4.17”

♦Selection camera NO.

In this step, the cameras used for the MOTION DETEC- TION setting are selected.

Example: Setting the SELECTION CAMERA NO. to “5”(the default setting is “1”).

1.After step 3 of M-DET SETTING procedures above. Check that the cursor is next to the SELECTION CAMERA NO. and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

<MOTION>￿	CAMERA NO.		￿
@SELECTION		1
￿	DETECTION	OFF ￿
CH.MOTION
SET DETECTION MASK￿		MED￿
SENSITIVITY			￿
MOTION THRESHOLD		2
TEST MODE		OFF

2.Turn the JOG dial to display “ 5” then turn the SHUTTLE ring to the right.

•The sub-item stops flashing.

<MOTION>￿	CAMERA NO.
@SELECTION		5
￿	DETECTION OFF
CH.MOTION
SET DETECTION MASK￿		MED￿
SENSITIVITY
MOTION THRESHOLD		2
TEST MODE		OFF

When the SELECTION CAMERA NO. setting has been made, the background display will switch to

the selected camera. By exiting the menu, the dis- play will revert to its original state.

♦CH. motion detection setting

MOTION DETECTION function can make activated for each of the connected cameras. The MOTION DETEC- TION function becomes operative only after this setting has been activated.

Example: Setting the CH. MOTION DETECTION to “ON” (the default setting is “OFF”).

1.After step 3 of M-DET SETTING procedures left. Turn the JOG dial to select the CH. MOTION DETECTION and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

<MOTION>￿

SELECTION CAMERA NO. 5 ￿

￿

@CH.MOTION DETECTION OFF ￿

SET DETECTION MASK￿	MED￿
SENSITIVITY		￿
MOTION THRESHOLD	2
TEST MODE	OFF

2.Turn the JOG dial to display ON then turn the SHUTTLE ring to the right.

•The sub-item stops flashing.

<MOTION>￿
SELECTION CAMERA NO.	5
￿	ON ￿
@CH.MOTION DETECTION
SET DETECTION MASK￿	MED￿
SENSITIVITY		￿
MOTION THRESHOLD	2
TEST MODE	OFF

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••• •

38