■Series Recording
By connecting multiple units as show in the chart below and selecting REC•STANDBY in the HDD Repeat Record- ing setting, this unit can perform Series Recording. In Se- ries Recording, when the first unit’s hard disk has become full, the second unit automatically begins recording.
System configuration (using two units)
| First Unit |
|
|
|
|
| Second Unit | ||
REC POWER ON POWER OFF | CALL OUT GND GND |
|
|
|
| CLOCK ADJUST REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND |
|
| |
GND | DC 5V OUT MAX 30mA |
| GND | GND | GND | ||||
1
INFORMATION
In this example, when the first unit’s hard disk reaches its maximum storage capacity,
the second unit will begin recording; when the sec- ond unit’s hard disk reaches its maximum storage capacity, the first unit will begin recording by over- writing its hard disk. If you do not want the first unit to begin the
INFORMATION
Through use of the CALL OUT ter- minal, settings can be made so that a second unit
begins recording in the event that something goes wrong with the recorder and it cannot continue re- cording.
| First Unit |
|
|
|
|
| Second Unit | ||
REC POWER ON POWER OFF | CALL OUT GND GND | GND | DC 5V OUT MAX 30mA |
| GND | CLOCK ADJUST REC POWER ON POWER OFF ALARM OUT MODE OUT CALL OUT CALL OUT GND | GND | GND | |
Something goes wrong with the recorder
Operation of | Recording | |
unit #1 | ||
| ||
Operation of | Recording | |
unit #2 | ||
|
♦Series Recording menu settings (for both units)
1. Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to the REAR TERMINAL then turn the SHUTTLE ring to the right.
<REAR TERMINAL>
@MODE OUTREC CAPACITY
3.Turn the JOG dial to move the cursor to CAPACITY REMAIN then turn the SHUTTLE ring to the right.
•The
<REAR TERMINAL>
MODE OUTREC @CAPACITY REMAIN
4.Check that the “HDD” is flashing. Turn the SHUTTLE ring to the right.
•Choose the HDD so that the second unit begins recording when the first unit’s hard disk approaches its storage limit.
•The flashing will move to capacity setting.
<REAR TERMINAL>
MODE OUTREC @CAPACITY REMAIN
5.Turn the JOG dial till desired capacity remain appears and then turn the SHUTTLE ring to the right.
•The
<REAR TERMINAL>
MODE OUTREC @CAPACITY REMAIN
6.Turn the JOG dial to move the cursor to MODE OUT and turn the SHUTTLE ring to the right.
•The
<REAR TERMINAL>
@MODE OUTREC CAPACITY REMAIN
7.Turn the JOG dial to flash “REMAIN”and turn the SHUTTLE ring to the right.
•The
<REAR TERMINAL>
@MODE OUT REMAIN CAPACITY REMAIN
8.Display the <INITIAL SET UP> menu.
•Press the SET UP button to display the <MENU SETTING> menu. Move the cursor to INITIAL SET UP and turn the SHUTTLE ring to the right.
<INITIAL SET UP> |
|
@TIME DATE ADJUST | STOP |
HDD FULL | |
HDD PB REPEAT | STOP |
ARCHIVE OVERWRITE | OFF |
AUTO EJECT | ON |
ARCHIVE DATA | ALL |
9.Turn the JOG dial to move the cursor to HDD FULL and turn the SHUTTLE ring to the right.
•The
<INITIAL | SET UP> |
|
TIME DATE ADJUST | STOP | |
@HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE | OVERWRITE | OFF |
| ON | |
AUTO EJECT | ||
ARCHIVE | DATA | ALL |
10.Turn the JOG dial to display REC•STANDBY and turn the SHUTTLE ring to the right.
•The
<INITIAL SET UP> |
| |
TIME DATE ADJUST |
| |
@HDD FULL | REC¥STANDBY | |
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT |
| ON |
ARCHIVE DATA |
| ALL |
11.Turn the SHUTTLE ring to the left or press the SET UP button.
♦Operation during Series Recording
When the storage capacity of the first unit’s HDD reaches a
a
| Overlapping period | Overlapping period | |
Operation of | Recording | Recording | |
unit #1 | |||
|
| ||
Operation of | Recording |
| |
unit #2 |
| ||
|
|
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
55
