Multiplexer functions
■Multiplexer functions
Please refer to “Multiplexer functions” on Basic Operation page 12 for details about the functions.
■Multiplexer buttons
The use of SPLIT/SEQUENCE button
By pressing the SPLIT/SEQUENCE button, you can switch the display mode as follows:
SPLIT 16 
SPLIT 9a 
SPLIT 9b 
SPLIT 4a 
SPLIT 4b 
SPLIT 4c 
SPLIT 4d
SPLIT 9 Sequential 
SPLIT 4 Sequential 
Single screen sequential 
The refresh cycle of camera images becomes longer as the number of cameras increases. Image can be viewed faster when cameras which are not needed are removed from the cameras designated in the DEFINE GROUP SETTING parameter on the <NORMAL REC SETTING> menu and
Images are displayed in real time during single screen display.
For details of the Camera number buttons and SPLIT/SEQUENCE button, please refer to “The functions of the SPLIT/SEQUENCE button, ZOOM button and camera number buttons” on next page.
INFORMATION
You can arrange the layout of all SPLIT DISPLAY settings on SPLIT SCREEN SET-
TING in the <MPX DISPLAY> menu. For details please refer to pages 43,44 , “SPLIT 4 SCREEN setting”,“SPLIT 9 SCREEN setting”,“SPLIT 16 SCREEN setting”.
It is also possible to select set- tings of SPLIT DISPLAY during playback by press-
ing the SPLIT/SEQUENCE button:
SPLIT 16 
SPLIT 9a 
SPLIT 9b 
SPLIT 4a
SPLIT 4d 
SPLIT 4c 
SPLIT 4b 
When the SPLIT SW PATTERN setting of the MPX DISPLAY menu is set to “SHORT”, display is
limited to either SPLIT16 or single screen.
When
TING> menu, “ - ” appears where the camera number is supposed to be displayed.
13
Ð | 9 |
You can view any picture in actual screen size by pressing the camera number button during SPLIT/
SEQUENCE button is used. You can go back to the previous SPLIT DISPLAY by pressing the SPLIT/ SEQUENCE button again.
♦How to use the ZOOM button
1.Display the ZOOM POINTER (X) by pressing the ZOOM button.
•The display enlargement function can be used only during single screen display.
X
2.Move the pointer to the desired position by pressing the camera number buttons 3 to 6.
X
3.Pressing the number 1 button (ZOOM IN)will enlarge the picture twice (X2) and four times (X4) as large as the actual display size.
X2 | X4 |
Pressing the camera number 2 button (ZOOM OUT button) will change the size of the display pic-
ture to actual display size. During enlarged display viewing, cannot display the menu.
The ZOOM POINTER’S position does not change when the display screen changes or when
power is turned off. This is convenient for situations where the desired viewing areas, such as the coun- ter or cash register, are determined in advance. In addition, the ZOOM POINTER can be used during playback of recorded images.
When playing back images from multiple cam- eras on single screen, if the ZOOM control is used
during the pause mode there is a possibility that a black screen will be displayed. In this case, the de- sired enlarged image can be obtained by moving through frames using the JOG dial.
INFORMATION
• Because ZOOM display function involves electronic enlargement, details of the im-
age will appear pixelized when enlarged.
•Enlarged display is cancelled if the Alarm recording start is triggered during enlarged display viewing.
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
41
