Mitsubishi Electronics DX-TL1600EM operation manual Various settings

Various settings (continued)

4.Turn the JOG dial until the present time display moves to the desired position.

•The present time display moves to the right when turning the JOG dial to the right. When the time display reaches the right edge of the screen, it goes down to the next line.

•The time display moves to the left when turning the JOG dial to the left. When the time display reaches the left edge of the screen, it goes up to the next line.

1)		-							Turn the JOG dial to
				-					the right to move the
	:		:
									display to the right.
2)									By continuing to turn the
					-			-
									JOG dial, the screen will
						:	:
									scroll to its rightmost border.
3)									After the screen has been
									moved to its rightmost
									border, it will move down
									one level.

5.When the time display reaches the desired position, turn the SHUTTLE ring to the right.

The display position can be changed when the setting of “CH. TITLE” in the <MPX DISPLAY>

menu is as follows:

•When set to “NONE”, the display position can be changed on single-screen, SPLIT 4, SPLIT 9 and SPLIT 16 screen.

•When set to “CH.NO” the display position can be changed on single screen only.

If “TITLE” is selected, the display position cannot be changed.

■Setting Multiplexer functions

Refer to page 41, “Multiplexer functions” for details.

■Setting Timer program

Refer to page 50, “Setting the Timer” for details.

■Setting recording functions

Refer to page 35, “Various recording settings” for details.

■Data Clear Selection

This unit provides a menu to select the device and its data to erase.

“WARNING – This function will erase all the data on the selected device. In case of the hard disk drive,

all data on all internal and external HDD will be erased” To edit this procedure press the SET UP key.

Example: Clearing the data recorded on main HDD.

1. Display the <MENU SETTING> menu and turn the JOG dial until the cursor( ) is next to “DATA CLEAR SELECTION”.

A-REC/M-DET SETTING￿

@DATA CLEAR SELECTION￿ COMMUNICATION SETTING

2.Turn the SHUTTLE ring to the right to show the <DATA CLEAR SELECTION> menu.

<DATA CLEAR SELECTION>￿

COPY DATA CLEAR	OFF￿
ARCHIVE DATA CLEAR	OFF￿
@HDD DATA CLEAR	OFF

By turning JOG dial, to select the medium of the data clear.

3.Turn the JOG dial until the cursor is next to “HDD DATA CLEAR” and turn the SHUTTLE ring to the right.

•The “OFF” flashing and the message, “ALL DATA AND ALL DRIVE DATA WILL BE ERASED.” appears on the screen.

<DATA CLEAR SELECTION>￿

COPY DATA CLEAR	OFF￿
ARCHIVE DATA CLEAR OFF￿
@HDD DATA CLEAR	OFF￿

￿

￿

￿

￿

ALL DATA AND ALL DRIVE￿

DATA WILL BE ERASED.

4.Turn the JOG dial until “ON” flashes.

•The message, “TURN THE SHUTTLE RING >> TO EXECUTE.” appears on the screen.

“COPY DATA CLEAR” or “ARCHIVE DATA CLEAR” appears on the screen when copy device

or archive device is connected.

5.Turn the SHUTTLE ring to the right to clear the data.

•If not needed, turn the JOG dial until “OFF” flashes and turn the SHUTTLE ring to the right.

Please note that you cannot exit from the menu when clearing the data and “ON” is flashing on the

screen.

6.Turn the SHUTTLE ring to the left or press the SET UP button.

■Rear Terminal Setting (MODE OUT setting)

A signal is output sending the status of this unit.

Example: Setting MODE OUT to “PLAY” (the default set- ting is “REC”).

1.Display the <MENU SETTING> menu and turn the JOG dial until the cursor is next to “REAR TERMINAL”.

DATA CLEAR SELECTION￿ COMMUNICATION SETTING￿

@REAR TERMINAL￿ SERVICE

2.Turn the SHUTTLE ring to the right to show the <REAR TERMINAL> menu.

<REAR	TERMINAL>￿
@MODE	OUT	REC￿
CAPACITY		REMAIN HDD-10%

3.Check the cursor is next to “MODE OUT”, then turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

<REAR TERMINAL>￿

@MODE OUT	REC￿
CAPACITY	REMAIN HDD-10%

4.Turn the JOG dial until “PLAY” flashes and turn the SHUTTLE ring to the right.

•The sub-item stops flashing.

<REAR	TERMINAL>￿
@MODE	OUT	PLAY￿
CAPACITY		REMAIN HDD-10%

By turning the JOG dial, the item of MODE OUT shown on the screen switches as shown below:

REC PLAY POWER REMAIN

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••• •

26