Various playback functions (continued) / Various search
■High-speed fast-forward/high-speed rewind
When the SHUTTLE ring is turned clockwise or counter clockwise for over one second during STOP mode, the unit will shift into
00:00:00 25F | 30% C16 |
S |
|
| E |
|
|
■Monitor display settings and playback operation
•Single screen : The screen will change frame by frame at a rate equal to the recording interval multiplied by the number of cameras used in the recording.
•SPLIT 4 : Each
•SPLIT 9 : Each
•SPLIT 16 : Each
■Time date search
Please refer to page 15 for detailed operation.
■Index Search
During Alarm Recording, an index signal will automatically be written onto the hard disk. Index Search is a process of retrieving still frames using their associated index signal to select the camera number.
The index count can be set, as desired, up to 99.
Example: Enter 10 for the index count, then start a search to select the camera number 5.
1.Press the SEARCH button to display the <SEARCH SELECTION> menu.
<SEARCH SELECTION> @SELECTION CAMERA NO.ALL TIME DATE SEARCH INDEX SEARCH
SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
2.Make sure that the cursor ( 
) is set to the SELECTION CAMERA NO. menu, and turn the SHUTTLE ring to the right.
•The sub-item of SELECTION CAMERA NO. will start flashing.
<SEARCH SELECTION> @SELECTION CAMERA NO.ALL TIME DATE SEARCH INDEX SEARCH
SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
3.Turn the JOG dial to display 5 then turn the SHUTTLE ring to the right.
•The flashing will stop.
<SEARCH SELECTION> @SELECTION CAMERA NO. 5 TIME DATE SEARCH INDEX SEARCH
SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
By turn the JOG dial, the selec- tion camera number will be changed as below :
ALL 
Q
W
E
R
T
Y
U
r
e
w
q
}
{
P
O
I
4.Turn the JOG dial to select the INDEX SEARCH, and turn the SHUTTLE ring to the right.
•The <INDEX SEARCH> menu will appear .
<SEARCH SELECTION> SELECTION CAMERA NO. 5 TIME DATE SEARCH @INDEX SEARCH
SKIP SEARCH ALARM LIST SEARCH
JUMP TO START POINT
5.Turn the JOG dial to display the desired index count, then turn the SHUTTLE ring to the desired search direction. (Turn right to move forward, turn left to move in reverse.)
•Index Search begins, and the images corresponding to the set index count are displayed either on a SPLIT 16 screen if “ALL” is selected in the SELECTION CAMERA NO. setting, or on a single screen if an individual camera number has been selected.
•The index count will begin blinking if the index signal has not been recorded, i.e., the Index Search will not be executed. Press the SEARCH button and the unit returns to normal playback mode.
<INDEX SEARCH> | 5 |
|
10
INPUT INDEX NUMBER
TURN THE SHUTTLE RING
<<OR >> TO VIEW NEXT
ALARM.
When “ALL” is selected in the setting parameter, switching the search result display from SPLIT 16
screen to the Single screen display for a specific camera number requires the following process. First press the SEARCH button, then delete the <SEARCH SELECTION> menu. Select the camera number by pressing the Camera number buttons on the front of this unit. The selected image will be shown on the Single screen mode.
When using DDS tape, index searches can be performed in the forward direction only.
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
57
