Various settings (continued)
■Initial set up
In the <INITIAL SET UP> menu, it is possible to set sev- eral items such as the present day and time, a function of this unit when the storage capacity of HDD runs out and during playback.
STOP
REC•STANDBY 
ALARM•PROT 
REPEAT
5.Turn the SHUTTLE ring to the left or press the SET UP button.
♦Clock setting
Refer to page 11, “Setting the present time” for details.
♦HDD repeat recording
This function is used to set the function of this unit when the storage capacity of HDD is running out.
Example: Setting HDD FULL to “REC•STANDBY” (the de- fault setting is “STOP”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor next to INITIAL SET UP and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu will appear.
<INITIAL SET UP> |
| |
@TIME DATE ADJUST | STOP | |
HDD | FULL | |
HDD | PB REPEAT | STOP |
ARCHIVE OVERWRITE | OFF | |
3.Turn the JOG dial until the cursor is next to HDD FULL and turn the SHUTTLE ring to the right.
•The
<INITIAL | SET UP> |
|
TIME DATE ADJUST | STOP | |
@HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE | OVERWRITE | OFF |
4.Turn the JOG dial to show “REC•STANDBY” and turn the SHUTTLE ring to the right.
•The
<INITIAL SET UP>
TIME DATE ADJUST
@HDD FULL REC¥STANDBY
HDD PB REPEAT STOP ARCHIVE OVERWRITE OFF
By turning the JOG dial, the sub- item of HDD FULL will be changed as follows:
“STOP”: When the disk reaches its end during re- cording, the recording stops and “HDD FULL” is shown on the screen.To start recording again, press the WARNING RESET button to clear the warning message and press the REC button.
“REC•STANDBY”: If the storage capacity of HDD runs out, the recording stops and the unit stays on the
“REPEAT”: When the disk reaches its end during recording, the recording starts again from the be- ginning of the disk.
“ALARM•PROT”: If there is an alarm recording after finishing the ALARM•PROT setting, the action of this unit is the same as when set to “STOP”. If there is no alarm recording during recording, this unit starts recording again from the beginning of the disk.
♦HDD repeat playback
It is a function which repeats playback of the recording on main HDD.
Example: Setting HDD PB REPEAT to “REPEAT” (the de- fault is “STOP”).
1.Display the <MENU SETTING> menu on the screen and turn the JOG dial until the cursor is next to INITIAL SET UP and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu appears.
<INITIAL SET UP> |
|
|
@TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
MOTION DETECTION | OFF | |
LANGUAGE SELECTION | ||
|
|
|
2.Turn the JOG dial until the cursor is next to HDD PB REPEAT and turn the SHUTTLE ring to the right.
•The
<INITIAL | SET UP> |
|
TIME DATE ADJUST | STOP | |
HDD FULL |
| |
@HDD PB REPEAT | STOP | |
ARCHIVE | OVERWRITE | OFF |
AUTO EJECT | ON | |
ARCHIVE | DATA | ALL |
3.Turn the JOG dial until “REPEAT” flashes and turn the SHUTTLE ring to the right.
•The
<INITIAL SET UP> |
|
|
TIME DATE ADJUST | STOP |
|
HDD FULL |
| |
@HDD PB REPEAT | REPEAT |
|
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL |
|
Another setting of HDD PB REPEAT:
“STOP”: The unit stops playback at the end of HDD.
4.Turn the SHUTTLE ring to the left or press the SET UP button.
♦Archive medium overwrite setting
Setting whether to overwrite on archive medium when mak- ing a new archive can be selected on the menu.
Example: Setting ARCHIVE OVERWRITE to “ON” (the default setting is “OFF”).
When ARCHIVE OVERWRITE is set to “ON”, all data on the archive medium will be erased. Make
sure to confirm the content in the archive medium before starting to make the backup.
1.Display the <MENU SETTING> menu on the screen. Turn the JOG dial until the cursor is next to “INITIAL SET UP” and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu is shown on the screen.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
30
