3) Settings for TIMER PROGRAM are made as follows.
•Designate Monday to Friday as the days of operation (SPECIAL DW). Then, in Program #1, set the action (MODE)
to “A– 1” for 08:00 to 15:00 on the designated days(SPL).
•In Program #2, set the action to “B– 1” for 15:00 to 20:00 on the designated days.
•In Program #3, set the action to “B– 1” for 08:00 to 17:00 on Saturday.
•In Program #4, set the action to “B– 1” for 08:00 to 17:00 on Sunday.
•In Program #5, set the action to “EJECT” for Sunday’s start- time of 00:00 to
Upon completing the above settings, press the unit’s TIMER REC button to initiate Timer operation.
■Operation example 4
This is an operation example of a Timer setting that com- bines NORMAL REC with Alarm Recording using MOTION DETECTION.
System configuration
Settings are entered so that the backups are created every Monday morning between 00:00 and 05:00. To facilitate the exchange of the storage medium after the backup has been completed, MODE is set to “EJECT”.
Cameras in SELECT REC MODE (A) are set to operate from 08:00 to 15:00 on Monday through Friday. Set the unit on POWER from 15:00 to 08:00 the next morning.
Cameras in SELECT REC MODE (B) are set to operate from 08:00 to next day 08:00 on Saturday and Sunday. The overall schedule is as shown in the following chart.
00 : 00 05 : 00 Monday Archive
replace archive medium
|
| 08 : 00 | 15 : 00 |
| ||
Monday to Friday |
|
|
|
|
| |
| SELECT REC MODE (A) | 24 : 00 | ||||
00 : 00 | 08 : 00 |
| ||||
|
|
| ||||
| POWER |
| ||||
|
|
|
|
|
| |
| POWER |
|
|
|
|
|
Saturday and Sunday | 08 : 00 | 24 : 00 | ||||
|
|
|
|
| ||
|
|
|
|
| ||
|
| SELECT REC MODE (B) |
| |||
00 : 00 |
|
|
| |||
|
|
|
|
| ||
|
|
|
|
|
|
|
| SELECT REC MODE (B) |
|
|
|
| |
Settings
1)Enter the same settings for the camera operation set- ting A as those for operation example 3 in the following: the CAMERA TITLE setting (on the <MPX DISPLAY> menu), DEFINE GROUP SETTING (on the <NORMAL REC SET- TING> menu), and recording conditions. Set the power set- ting that uses MOTION DETECTION as follows.
•Set IMAGE QUALITY to “HIGH”.
•Set MAX REC FIELDS to “1F”.
•Set
•Set RECORD ALARM to “ALL”.
•Set PRE
•On the <DEFINE ALARM GROUP> menu, set the cameras Q,W,E,I,O,} and w.
<DEFINE ALARM GROUP>
CH PRI FILD | CH PRI FILD | ||||
@Q | 2 | 0.11 | O | 1 | 0.22 |
W | 1 | 0.22 | P | - |
|
E | 1 | 0.22 | { | - | 0.22 |
R | - |
| } | 1 | |
T | - |
| q | - | |
Y | - |
| w | 1 | 0.22 |
U | - | 0.11 | e | - | |
I | 2 | r | - | ||
|
|
|
|
| |
2)Settings for MOTION DETECTION SETTING are made as follows.
To make the
•Using SELECTION CAMERA NO., set each of the following camera numbers Q, W, E, I, O, } and w as follows.
•Set CH.MOTION DETECTION to “ON”.
•Set SET DETECTION MASK, SENSITIVITY, MOTION THRESHOLD TEST MODE.
<MOTION> |
| |
@SELECTION CAMERA NO. 1 | ||
ON | ||
CH.MOTION DETECTION | ||
SET DETECTION MASK | HIGH |
|
SENSITIVITY | ||
MOTION THRESHOLD | 5 | |
TEST MODE | OFF |
|
3)Settings for TIMER PROGRAM are made as follows.
•Select “P1” for the setting “SELECTED PATTERN” in the <TIMER PROGRAM> menu and select “ON” for the setting “REC MODE (POWER)” in the
<TIMER PROGRAM> | P1 |
SELECTED PATTERN | |
DEFINE P1 |
|
DEFINE P2 |
|
DEFINE P3 |
|
| |
OFF | |
REC MODE (A) | |
REC MODE (B) | OFF |
REC MODE (C) | OFF |
@REC MODE (POWER) | ON |
|
•Designate Monday to Friday as the days of operation (SPECIAL DW). Then, in Program #1, set the action (MODE)
to “A– 1” for 08:00 to 15:00 on the designated days(SPL).
•In Program #2, set the action to “POWER” for 15:00 to 08:00 the next morning.
•In Program #3, set the action to “POWER” for 08:00 to 08:00 the next morning.
•In Program #4, set the action to “POWER” for 08:00 to 08:00 the next morning.
•In Program #5, set the action to “EJECT” for Sunday’s start- time of 00:00 to
Upon completing the above settings, press the unit’s TIMER REC button to initiate Timer operation.
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
49
