Multiplexer functions (continued)
4.Make sure that the cursor is next to “SPLIT 9a” . Turn the SHUTTLE ring to the right.
5.Repeat steps 5 to 7 of SPLIT 4 SCREEN setting on page
43to set the rest of the position.
•You cannot set the same number in SPLIT 9 SCREEN setting. If the flashing goes back to the original position, you have to change settings to make sure the same camera numbers are not set at different positions.
6.Press the SET UP button.
•The <SPLIT9 SCREEN SETTING> menu will disappear.
You cannot exit the menu if you set same cam- era numbers at different positions. In this case,
please change settings.
♦SPLIT 16 SCREEN setting
Example: Displaying desired camera pictures with desired layout in SPLIT 16 SCREEN.
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY and turn the SHUTTLE ring to the right.
•The <MPX DISPLAY> menu will appear.
3.Turn the JOG dial to move the cursor to SPLIT 16 SCREEN SETTING then turn the SHUTTLE ring to the right.
•The <SPLIT16 SCREEN SETTING> menu will appear.
<SPLIT16 SCREEN SETTING> @SPLIT16
Q W E R T Y U I O P { } q w e r
4.Make sure that the cursor is next to “SPLIT 16”. Turn the SHUTTLE ring to the right.
5.Repeat steps 5 to 7 of SPLIT 4 SCREEN setting on page
43to set the rest of the position.
•You cannot set the same number in SPLIT 16 SCREEN setting. If the flashing goes back to the original position, you have to change settings to make sure the same camera numbers are not set at different positions.
6.Press the SET UP button.
•The <SPLIT16 SCREEN SETTING> menu will disappear.
You cannot exit the menu if you set same cam- era numbers at different positions. In this case,
please change settings.
♦Image quality of split screen
It is possible to set the image quality for
By setting IMAGE QLTY to “NO FLICKER”, im- ages being displayed in either SPLIT4, SPLIT9, or
SPLIT16 modes will show reduced flicker, although vertical resolution may slightly degraded.
Example: Setting the image quality of split screen to “NO FLICKER” (the default setting is “HIGH”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY then turn the SHUTTLE ring to the right.
•The <MPX DISPLAY> will appear.
3.Turn the JOG dial to move the cursor to IMAGE QLTY then turn the SHUTTLE ring to the right to select the
SPLIT 16 SCREEN SETTING
@IMAGE QLTY HIGH SEQUENCE
4.Turn the JOG dial to choose “NO FLICKER” and turn the SHUTTLE ring to the right to fix setting.
•The
SPLIT 16 SCREEN SETTING @IMAGE QLTY NO FLICKER SEQUENCE
5.Turn the SHUTTLE ring to the left or press the SET UP button to finish setting.
♦SEQUENCE setting
The sequential setting is designed to automatically switch the
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY then turn the SHUTTLE ring to the right.
•The <MPX DISPLAY> menu will appear.
3.Move the cursor to SEQUENCE then turn the SHUTTLE ring to the right.
•The <SEQUENCE> menu will appear.
4.Turn the JOG dial to select the desired camera number, then turn the SHUTTLE ring to the right.
•The channel number will start flashing.
<SEQUENCE> | TIME 1S | |
SEQ. 1 | CH.@ 1 | |
2 | 2 | 1S |
3 | 3 | 1S |
4 | 4 | 1S |
The SEQUENCE menu is composed of two screens. By rotating the jog to move the cursor from
its position next to the CH.Q number to CH.9, the menu will automatically scroll to the next screen.
|
|
|
|
|
|
<SEQUENCE> | TIME | 1S | |||
SEQ. 10 | CH.@ P | ||||
11 | { | 1S | |||
| 12 | } |
| 1S | |
| 13 | q |
| 1S | |
| 14 | w |
| 1S | |
| 15 | e |
| 1S | |
| 16 | r |
| 1S | |
SPLIT4 | a b c d |
| 1S | ||
SPLIT9 | a b |
| 1S | ||
|
|
| |||
|
|
|
|
| |
|
|
|
|
|
|
5.Turn the JOG dial till desired channel number appears and turn the SHUTTLE ring to the right to enter the selection.
•The flashing will move to “TIME”.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
44
