Please note that in the
TECTION setting in the <INITIAL SET UP> menu is “ON”.
13.Turn the SHUTTLE ring to the left or press the SET UP button.
INFORMATION
Please refer to “Alarm Recording op- eration” on page 53 for details of the alarm recording.
♦Camera Alarm Rec setting
This is the setting for the camera to start recording when ALARM IN terminal is grounded (alarm recording signal is input). This setting is only effective during alarm recording. After alarm recording, operations return to their prior settings.
Example: Setting the RECORD ALARM to “ALL” (the de- fault setting is “SEP”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to
•The <A-REC/M-DET SETTING> menu will appear.
3.Turn the JOG dial to move the cursor to RECORD ALARM then turn the SHUTTLE ring to the right to fix setting.
•The
4.Turn the JOG dial to display “ALL”, and turn the SHUTTLE ring to the right to fix setting.
•The
15S | |
@RECORD ALARM | ALL |
PRE | OFF |
By turning the JOG dial, the sub - item of RECORD ALARM will be changed as follows:
SEP
ALL
“SEP”: The alarm recording will start only with the camera which received the alarm signal. If several cameras received alarm input at once, all of those cameras will start alarm recording.
“ALL”: The alarm recording will start with all cameras set to be operated on the <DEFINE ALARM GROUP> menu when ALARM IN terminal is grounded.
1.Make settings for IMAGE QUALITY , MAX REC FIELDS , DEFINE GROUP SETTING,
5M | |
@RECORD ALARM | ALL |
PRE | OFF |
2.Turn the JOG dial to move the cursor to PRE
5M | |
RECORD ALARM | ALL |
@PRE | OFF |
3.Turn the JOG dial to flash LONG, and turn the SHUTTLE ring to the right. The unit will be in
Pre-alarm recording.
•PRE ALARM REC indicator on the front of the unit will start illuminating.
5M | |
RECORD ALARM | ALL |
@PRE | LONG |
By turning the JOG dial, the sub- item of PRE
OFF
SHORT 
LONG 
MEDIUM
4.Ground the ALARM IN terminal.
•The unit will start alarm recording.
The duration of recording before the ALARM IN ter- minal is triggered depends on the MAX REC FIELDS,
IMAGE QUALITY, and PRE
Setting cannot be altered in either the NORMAL REC SETTING menu or the
TING menu when the PRE
INFORMATION
To activate
cording” on page 54.
Following the end of
Alarm input
(ALARM IN signal)
ENGLISH |
5.Turn the SHUTTLE ring to the left or press the SET UP button.
When the RECORD ALARM setting is set to “SEP”, the “PRI” setting on the <DEFINE GROUP SETTING>
menu at this time can only be either “ 1 ” or “ - ”, and then the “FILD” will not be appear on screen.
♦Pre-alarm recording setting
During alarm recording, it is possible to record the infor- mation before the ALARM IN terminal is activated.
Example: Set the PRE
Recording
Mode
Effective recording setting
Effective recording
CAMERA CH setting
Pre - alarm recording
LONG/MEDIUM/SHORT of
PRE A-REC
IMAGE QUALITY/
MAX REC FIELDS of
All the CAMERA CH
set in PRIORITY settings 1 – 5 of the DEFINE ALARM GROUP setting.
Alarm recording
IMAGE QUALITY/
MAX REC FIELDS/
A-REC DURATION
When RECORD ALARM setting is SEP, only the CAMERA CH receiving an Alarm Recording signal.
When RECORD ALARM setting is ALL, all the CAMERA CH specified in the DEFINE GROUP SETTING setting.
When you wish to use the ALARM IN signal to activate Alarm Recording,
CAMERA CH of the cameras to be used must be set to something other than
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
37
