■Multiplexer display
♦SCREEN SW PATTERN settings
In this steps, the screen switch pattern is set.
Example: Setting the screen switch pattern to “SHORT” (the default setting is “ALL”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY and turn the SHUTTLE ring to the right.
•The <MPX DISPLAY> menu will appear.
<MPX DISPLAY> | ALL |
|
@SCREEN SW PATTERN |
| |
SPLIT 4 SCREEN SETTING |
| |
SPLIT 9 SCREEN SETTING |
| |
SPLIT 16 SCREEN SETTING | ||
IMAGE QLTY | HIGH | |
SEQUENCE | CH.NO |
|
CH.TITLE |
| |
CAMERA TITLE | ON | |
ALARM DISPALY | ||
3.Check that the cursor is next to the SCREEN SW PATTERN and turn the SHUTTLE ring to the right.
•The
<MPX DISPLAY> | ALL |
| |
@SCREEN SW PATTERN |
| ||
SPLIT 4 | SCREEN SETTING |
| |
SPLIT 9 | SCREEN SETTING |
| |
SPLIT 16 SCREEN SETTING | |||
IMAGE QLTY | HIGH | ||
4.Turn the JOG dial to display SHORT then turn the SHUTTLE ring to the right.
•The
<MPX DISPLAY> |
|
| |
@SCREEN SW PATTERN SHORT |
| ||
SPLIT 4 | SCREEN SETTING |
| |
SPLIT 9 | SCREEN SETTING |
| |
SPLIT 16 SCREEN SETTING | |||
IMAGE QLTY | HIGH | ||
“ALL” : using this setting, all the display modes and sequential display modes for SPLIT9, SPLIT4, and single screens can be selected.
“SHORT” : using this setting, single screen sequen- tial, SPLIT4, SPLIT9 sequential and SPLIT16 dis- plays can be selected. By combining SEQUENCE with the
5.Turn the SHUTTLE ring to the left or press the SET UP button.
♦SPLIT 4 SCREEN setting
SPLIT 4 SCREEN setting mode, you can choose between a to d of SPLIT 4 display mode. Before you choose the setting, arrange the camera position as you like in this sec- tion.
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY and turn the SHUTTLE ring to the right.
•The <MPX DISPLAY> menu will appear.
3.Turn the JOG dial to move the cursor to SPLIT 4 SCREEN SETTING then turn the SHUTTLE ring to the right.
•The <SPLIT4 SCREEN SETTING> menu will appear.
<SPLIT4 SCREEN SETTING>
@SPLIT4a SPLIT4b
Q W | T Y |
E R | U I |
SPLIT4c | SPLIT4d |
O P | q w |
{ } | e r |
4.Make sure that the cursor is next to “SPLIT4a”. Turn the SHUTTLE ring to the right.
5.Check that the top left number (default setting is set to 1) is flashing. Turn the JOG dial to display the desired camera number then turn the SHUTTLE ring to the right to fix setting.
•The flashing will move to the next camera number.
<SPLIT4 SCREEN SETTING>
@SPLIT4a SPLIT4b
Q W | T Y |
E R | U I |
SPLIT4c | SPLIT4d |
O P | q w |
{ } | e r |
6.Set all camera numbers according to the steps written on the previous page.
<SPLIT4 SCREEN SETTING>
@SPLIT4a SPLIT4b
W T | Q Y |
O I | U } |
SPLIT4c | SPLIT4d |
w E | P q |
{ r | e R |
7.Check that all camera numbers are set .Turn the SHUTTLE ring to the right to fix setting.
•The flashing will stop.
•Settings cannot be made when the same camera number is
in SPLIT 4 SCREEN setting mode. (Possible if using a different SPLIT4 operation) When the same camera has been selected, the blinking light will return to its original state even if all the camera numbers have been input. Check to see if the same camera number has been entered; if the same number has been entered, please change the settings.
8.Press the SET UP button.
•The <SPLIT4 SCREEN SETTING> menu will disappear.
♦SPLIT 9 SCREEN setting
Example: Displaying desired camera pictures with desired layout in SPLIT 9 SCREEN.
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Turn the JOG dial to move the cursor to MPX DISPLAY and turn the SHUTTLE ring to the right.
•The <MPX DISPLAY> menu will appear.
3.Turn the JOG dial to move the cursor to SPLIT 9 SCREEN SETTING then turn the SHUTTLE ring to the right.
•The <SPLIT9 SCREEN SETTING> menu will appear.
<SPLIT9 SCREEN SETTING> @SPLIT9a SPLIT9b
Q W E | Q W P |
R T Y | { } q |
U I O | w e r |
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
43
