Various settings (continued)
1). Backing up a data block containing the alarm record.
| Normal recording | ||||
|
|
|
|
| |
Main | Alarm recording |
| |||
HDD | 1MB |
|
| 1MB | |
Archive |
|
| |||
|
|
|
| ||
Backup recording | |||||
media | |||||
|
|
|
| ||
|
|
|
|
| |
2). Backing up a small alarm record.
Normal recording
|
|
| Alarm recording | ||||
|
|
|
|
|
|
|
|
Main |
|
| Normal recording |
| |||
HDD | 1MB |
|
| 1MB |
| ||
Archive
media
Backup recording
♦FIFO/OVERWRITE MODE setting
This is the setting for repeated backup to the HDD connected to ID4. The setting item for this function is displayed in the menu only when an HDD is connected to ID4. When a power failure has occurred during a backup, the backup operation does not recover automatically. Press the ARCHIVE button to restart the backup. (At the time of timer reservation, backup restarts automatically after recovery from the power failure.)
At this time, all data backed up until the occurrence of the power failure will be lost, and the backup pointer also returns to the backup start point before the occur- rence of the power failure. Please pay attention to this.
Before making the FIFO/OVERWRITE MODE setting, confirm that an HDD is connected correctly
to ID4.
Example: Setting FIFO/OVERWRITE MODE to “ON” (the default is “OFF”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Move the cursor to INITIAL SET UP and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu will be displayed.
<INITIAL SET UP> |
|
|
@TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
FIFO/OVERWRITE MODEOFF | ||
MOTION DETECTION | OFF | |
LANGUAGE SELECTION | ||
|
|
|
3.Turn the JOG dial move the cursor to FIFO/OVERWRITE MODE. Turn the SHUTTLE ring to the right.
•Turn the JOG dial to make the selection options flash.
ARCHIVE OVERWRITE | OFF |
AUTO EJECT | OFF |
ARCHIVE DATA | ALL |
@FIFO/OVERWRITE MODE | OFF |
4.Turn the JOG dial to make the “ON” option flash.Turn the SHUTTLE ring to the right.
•The
ARCHIVE OVERWRITE | OFF |
AUTO EJECT | OFF |
ARCHIVE DATA | ALL |
@FIFO/OVERWRITE MODE | ON |
5.Turn the SHUTTLE ring to the left or press the SET UP button.
♦Motion Detection setting
To use MOTION DETECTION, first turn the setting “ON” in the INITIAL SET UP menu.
The <MOTION DETECTION> menu cannot be displayed when this setting is OFF. The sub menu
of
Example: Setting MOTION DETECTION to “ON” (the de- fault is “OFF”).
1.Display the <MENU SETTING> menu on the screen and turn the JOG dial to select the INITIAL SET UP ,and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu appears.
<INITIAL SET UP> |
|
|
@TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
MOTION DETECTION | OFF | |
LANGUAGE SELECTION | ||
|
|
|
2.Turn the JOG dial to select the MOTION DETECTION and turn the SHUTTLE ring to the right.
•The
<INITIAL SET UP> |
|
|
TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
@MOTION DETECTION | OFF | |
LANGUAGE SELECTION |
|
|
3.Turn the JOG dial until ON flashes and turn the SHUTTLE ring to the right.
•The
<INITIAL SET UP> |
|
|
TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
@MOTION DETECTION | ON | |
LANGUAGE SELECTION |
|
|
4.Turn the SHUTTLE ring to the left or press the SET UP button.
Please set the MOTION DETECTION to “OFF” , when the function is not needed.
When the MOTION DETECTION setting in the INITIAL SET UP menu is turned ON, the MAX REC
FIELDS for each time setting will be automatically
altered as follows. These settings will not auto- matically revert to their former values even if MOTION DETECTION is turned OFF.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | •••••••••••• | • |
32
