3.Turn the JOG dial until the cursor is next to ARCHIVE POINT RESET and turn the SHUTTLE ring to the right.
•The
4.Turn the JOG dial until “ON” flashes.
<SERVICE> |
|
|
POWER FAILURE | ON |
|
@ARCHIVE POINT RESET |
| |
MENU INITIALIZE | OFF |
|
OFF |
|
5.When the message, “TURN THE SHUTTLE RING >> TO EXECUTE.” is shown on the screen, turn the SHUTTLE ring to the right.
•The Archive Pointer is now reset.
•If not executing,turn the JOG dial until “OFF” is shown.
<SERVICE> |
|
POWER FAILURE | ON |
@ARCHIVE POINT RESET | |
MENU INITIALIZE | OFF |
OFF | |
| |
TURN THE SHTTLE RING |
|
>>TO EXECUTE.
6.Turn the SHUTTLE ring to the left or press the SET UP button.
♦Initializing menus
Selecting “ON” of MENU INITIALIZE in the <SERVICE> menu initializes the setting ,except for the
Example: Setting MENU INITIALIZE to “ON” (the default is “OFF”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Move the cursor next to SERVICE then turn the SHUTTLE ring to the right.
•The <SERVICE> menu appears.
3.Turn the JOG dial until the cursor is next to MENU INITIALIZE and turn the SHUTTLE ring to the left to show “ON”.
<SERVICE> |
|
POWER FAILURE |
|
ARCHIVE POINT RESET OFF | |
@MENU INITIALIZE | ON |
OFF | |
4.When “PUSH WARNING RESET KEY THEN ALL MENU WILL BE INITIALIZED.” appears on the screen, press the WARNING RESET button.
<SERVICE> |
|
POWER FAILURE |
|
ARCHIVE POINT RESET OFF | |
@MENU INITIALIZE | ON |
IM | OFF |
| |
PUSH WARNING RESET KEY | |
THEN ALL MENU |
|
WILL BE INITIALIZED. |
|
•If not executing, change the
5.SPLIT 16 screen will be shown on the monitor and all menus are initialized.
2000 12:12:05 |
| ||
Q | W | E | R |
T | Y | U | I |
|
|
|
|
O | P | { | } |
|
|
|
|
q | w | e | r |
|
|
|
|
•Please note that time date display, timer program setting, the title of all cameras set in CAMERA TITLE of the <MPX DISPLAY> menu are not initialized.
•The SELECTED PATTERN setting will be initialized to P1 of TIMER PROGRAM on the <MENU SETTING> menu. Please refer to the Menu displays on page 50.
♦IM-CHECK MODE setting
This function is designed to confirm whether alterations have been made to the data recorded by the unit.
Example: Setting
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Move the cursor next to SERVICE then turn the SHUTTLE ring to the right.
•The <SERVICE> menu appears.
3.Turn the JOG dial until the cursor is next to
•The
4.Turn the JOG dial until “ON” flashes.
<SERVICE> |
|
|
POWER FAILURE | OFF |
|
ARCHIVE POINT RESET |
| |
MENU INITIALIZE | OFF |
|
ON |
|
5.Turn the SHUTTLE ring to the left or press the SET UP button.
INFORMATION
To distinguish alterations to recorded data:
•Use the PLAY DEVICE button to select the device that is to be inspected for alterations.
•Press the PLAY button to begin playback of re- corded data.
•If an alteration is detected on part of the data during playback, “ ■ ” will appear to the right of the “A” (Alarm Recording number) in the Time Display. “ ■ ” indi- cates the CAMERA channel of the altered data.
00:00:00 25F | 50% C16 |
WARNING: MODIFIED IMAGE
(QWERTYUIOP{}qwer)
•The displayed “ ■ ” and the WARNING display can be cleared by pressing the WARNING RESET but- ton.
•This function does not work with the communica- tion function.
If you don’t use this function, please select the
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
29
