Mitsubishi Electronics DX-TL1600EM Various search / Using peripheral devices / Making copies

Various search (continued) / Using peripheral devices / Making copies

When over-writing data stored on the hard disk drive, the start-time for a given Alarm Recording will

be automatically erased from the Alarm List when the image data recorded at the start of that Alarm Recording is over-written.

4.To play back search results.

•Press either the PLAY button or the PAUSE button.

5.Press the STOP button to stop playback and still frame mode.

•Press the SEARCH button, the display will revert to its original state.

During playback of the archive device or copying device media, playback can be made using an in-

terval that differs from the recording interval by press- ing the PLAY button or the REV PLAY button. Visual quality will depend on the device’s transmission speed.

3.Select the device to be played by pressing the PLAY DEVICE button on the front of this unit. The selected device’s indicator light will turn on.

PLAY DEVICE

ENGLISH

■Jump to Start point (oldest recording)

A process for finding the start point of oldest recorded data, and delivering that start-point on-screen as a still frame.

1.Press the SEARCH button to display the <SEARCH SELECTION> menu.

2.Turn the JOG dial to select the JUMP TO START POINT, and turn the SHUTTLE ring to the right.

<SEARCH SELECTION>￿ SELECTION CAMERA NO. 5￿ TIME DATE SEARCH￿ INDEX SEARCH￿

SKIP SEARCH￿ ALARM LIST SEARCH￿

￿

￿

￿

@JUMP TO START POINT

Check whether the connected device’s access lamp is on.

4.Press the PLAY button.

•The device will start playing after a still picture has been displayed.

Various play and search options using the SHUT- TLE ring are possible during playback of the copy

ing device, although there will be some delay be- fore images are displayed.

INFORMATION

If a DDS-type tape media is con- nected as an external recording device, playback,

eject and other functions may take a few minutes depending on the media’s recording condition.

3.Turn the SHUTTLE ring to the right when the <JUMP TO START POINT> menu appears.

•The unit displays the still frames of the 1st part of the recording on a SPLIT 16 screen. For full-screen viewing of a particular frame, press the button of that image’s camera number.

<JUMP TO START POINT>￿

￿

TURN THE SHUTTLE RING￿

>> TO PLAY BACK￿ OLDEST RECORDED DATA.

To play back search results, press either the PLAY button or the PAUSE button.

4.Press the STOP button to stop searching.

•The display will revert to its original state.

■SCSI ID number allocation

ID0 to ID3 are allocated to the main hard disk drive. ID4 is allocated to the archive device, and ID5 is allocated to the copying device.

■Copying from the hard disk to the copying device

This unit features the capability to use a designated copy device to copy data recorded on its hard disk. In addition, the Copy range can be specified.

The copying device must be connected to ID5 when copying recorded material. Refer to page 19

for more details on ID numbers.

•Set the COPY DIRECTION on the <COPY SELECTION> menu to “HDD } COPY”.

•Set the OVERWRITE on the <COPY SELECTION> menu to “OFF”. Refer to page 16 for details on the <COPY SE- LECTION> menu settings.

When “ON” is selected, previously recorded data will be erased and the designated Copy range will

be copied. When “OFF” is specified, copying will begin at a point after the previously recorded data.

■Selecting other devices

The device to be used in playback can be chosen using the PLAY DEVICE button located on the main unit’s front face. Check to see that the selected device’s PLAY DE- VICE indicator is on.

1.Press the POWER button.

2.Insert the medium of archive device or copying device.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

59