COMMUNICATION SETTING REAR TERMINAL SERVICE
@INITIAL SET UP
2.Move the cursor to ARCHIVE OVERWRITE and turn the SHUTTLE ring to the right until the
<INITIAL SET UP> |
|
|
TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
@ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
MOTION DETECTION | OFF | |
LANGUAGE SELECTION | ||
|
|
|
3.Turn the JOG dial until “ON” flashes and turn the SHUTTLE ring to the right.
•The
<INITIAL SET UP> |
|
TIME DATE ADJUST | STOP |
HDD FULL | |
HDD PB REPEAT | STOP |
@ARCHIVE OVERWRITE | ON |
The Archive Pointer Glossary is recorded when backup is either temporarily stopped or finished.
Using this, the unit will begin the next backup at the end point of the previous backup.
4.Turn the SHUTTLE ring to the left or press the SET UP button.
<INITIAL SET UP> |
|
TIME DATE ADJUST | STOP |
HDD FULL | |
HDD PB REPEAT | STOP |
@ARCHIVE OVERWRITE | ON |
AUTO EJECT | ON |
|
♦Auto-eject setting
This setting is for ejecting the medium of an archive device automatically. If you set to “ON” and make the back up timer program, the archive medium is ejected automati- cally at the end of the programmed time. If you set to “OFF”, the archive medium will not be ejected.
Example: Setting AUTO EJECT to “OFF” (the default is “ON”).
1.Display the <MENU SETTING> menu on the screen and turn the JOG dial until the cursor is next to INITIAL SET UP and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu appears.
<INITIAL SET UP> |
|
@TIME DATE ADJUST | STOP |
HDD FULL | |
HDD PB REPEAT | STOP |
ARCHIVE OVERWRITE | OFF |
AUTO EJECT | ON |
ARCHIVE DATA | ALL |
2.Turn the JOG dial until the cursor is next to AUTO EJECT and turn the SHUTTLE ring to the right.
•When the
HDD PB REPEAT | STOP |
ARCHIVE OVERWRITE | OFF |
@AUTO EJECT | OFF |
ARCHIVE DATA | ALL |
3.Check “OFF” is flashing and turn the SHUTTLE ring to the right.
HDD PB REPEAT | STOP |
ARCHIVE OVERWRITE | OFF |
@AUTO EJECT | OFF |
ARCHIVE DATA | ALL |
4.Turn the SHUTTLE ring to the left or press the SET UP button.
Archive medium is also ejected when the ARCHIVE button is pressed once again, after operation has been
initiated with the ARCHIVE button. Refer to page 62,
♦ARCHIVE DATA setting
When backing up records onto backup media, it is possi- ble to select and back up only the “ALARM” part of the records by setting ARCHIVE DATA to “ALARM”.
Example: Setting backup operation selection to “ALARM” (the default is “ALL”).
1.Press the SET UP button to display the <MENU SETTING> menu.
2.Move the cursor to INITIAL SET UP and turn the SHUTTLE ring to the right.
•The <INITIAL SET UP> menu will be displayed.
<INITIAL SET UP> |
|
|
@TIME DATE ADJUST | STOP | |
HDD FULL | ||
HDD PB REPEAT | STOP | |
ARCHIVE OVERWRITE | OFF | |
AUTO EJECT | ON | |
ARCHIVE DATA | ALL | |
MOTION DETECTION | OFF | |
LANGUAGE SELECTION | ||
|
|
|
3.Turn the JOG dial move the cursor to ARCHIVE DATA. Turn the SHUTTLE ring to the right.
•Turn the JOG dial to make the selection options flash.
HDD PB REPEAT | STOP |
ARCHIVE OVERWRITE | OFF |
AUTO EJECT | OFF |
@ARCHIVE DATA | ALL |
4.Turn the JOG dial to make the “ALARM” option flash.Turn the SHUTTLE ring to the right.
•The
HDD PB REPEAT | STOP | |
ARCHIVE | OVERWRITE | OFF |
AUTO EJECT | ON | |
@ARCHIVE | DATA | ALARM |
5.Turn the SHUTTLE ring to the left or press the SET UP button.
By turning the JOG dial, the sub- item of ARCHIVE DATA shown on the menu will be changed as follows:
“ALL”: This backs up all the data recorded on the main HDD after the ARCHIVE POINTER. Alterna- tively, all data will be backed up.
“ALARM”: Of all the data blocks recorded on the main HDD(1 MB units), this will back up only the data blocks that contain the alarm record. Some data either side of the alarm record may be included when backing up a small alarm record.
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
31
