Mitsubishi Electronics DX-TL1600EM How to set up / Various settings, How to display menus

How to set up / Various settings

■How to display menus

As shown in the menu displayed on pages 22 - 24, the menus are divided into several layers. The following steps show how to display the desired menu on the screen.

When any of the menu displays are shown on the screen, the SPLIT/SEQUENCE button, the Camera

number button and the ZOOM button do not work.

1.Find the menu you want to view from the menu overview on pages 22 - 24 and press the correct key to activate the menu.

2.When the menu you want to view is active:

•The <MENU SETTING> menu, press the SET UP button on the front panel of this unit.

	<MENU	SETTING>￿
	▲TIME	DATE DISPLAY￿
	MPX DISPLAY￿
SET UP	TIMER PROGRAM￿
	NORMAL REC SETTING￿
	A-REC/M-DET SETTING￿
	DATA	CLEAR SELECTION￿
	COMMUNICATION SETTING￿
	REAR	TERMINAL￿
	SERVICE￿
	INITIAL SET UP

•The <SEARCH SELECTION> menu, press the SEARCH button on the front panel of this unit.

	<SEARCH SELECTION>￿
SEARCH	▲SELECTION CAMERA NO. ALL ￿
	TIME DATE SEARCH￿
	INDEX SEARCH￿
	SKIP SEARCH￿
	ALARM LIST SEARCH￿	￿
	￿
	￿
	￿
	JUMP TO START POINT

•The <INFORMATION> menu, press the INFO button on the front panel of this unit.

	<INFORMATION>￿
INFO	▲RECORDED PERIOD￿
	CONNECTED SCSI DEVICE￿
	￿
	￿
	￿
	￿
	<ELAPSED TIME>￿
	MAIN￿	10000H￿
	ARCHIVE￿	10000H￿
	COPY	10000H

•The <COPY SELECTION> menu, press the COPY button on the front panel of this unit.

	<COPY SELECTION>￿
COPY	▲COPY DIRECTION	HDD}COPY￿
	OVERWRITE	OFF￿
	TRANSFER PERIOD	MAN￿
	FROM:06-09-01 02:59:12￿
	TO:06-09-01 03:59:12￿
	EXECUTE	OFF￿
	￿
	￿

Then, the main menu of each category will be shown on the screen.

3. Turn the JOG dial until the cursor ( ) is next to the desired item and turn the SHUTTLE ring to the right to show its setting.

• Please refer to the relevant section of this manual for the detailed setting of each menu.

■Setting Display Mode

Type and setting of display.

Display Mode Display Sample

1	Date, Present time,Camera number	09-06-2001	11:39:10 C01
	display
	Date, Day of the week, Present time,
2	Recording interval, Camera number	09-06-2001 SAT￿
	display	11:39:10 25F	C01￿
		￿
	Date, Day of the week, Present time,
3		09-06-2001 SAT￿
	Recording interval, Camera number	11:39:10 25F	99% C01
	display, Recording capacity of HDD
	will be displayed.
	No indication
4	(When alarm signal is input, Date, Day of
	the week, Present time, Recording interval
	will be displayed.)
	No indication
5	(When warning signal is input,
	warining indicator will be displayed.)
6	No indication

Display mode 2 to 5 are only available when single screen is displayed or "CH. TITLE" is set to "NONE" on the <MPX DISPLAY> menu.

Example: Selecting DISPLAY MODE to “3” (the default setting is “1”).

1.Display the <MENU SETTING> menu on the screen. Check the cursor is next to TIME DATE DISPLAY and turn the SHUTTLE ring to the right.

•The <TIME DATE DISPLAY> menu appears.

2.Check that the cursor is next to “DISPLAY MODE” and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

3.Turn the JOG dial until “3” flashes and turn the SHUTTLE ring to the right.

<TIME DATE DISPLAY>￿	1￿
@DISPLAY MODE
CHARACTER SIZE	SMALL
<TIME DATE DISPLAY>￿	3￿
@DISPLAY MODE
CHARACTER SIZE	SMALL

4.Turn the SHUTTLE ring to the left or press the SET UP button, to exit.

♦Setting character size

Refer to page 10 “Basic Operations” for the setting of char- acter size.

♦Setting Display Position

1.Repeat steps 1 to 2 of display mode to display the <TIME DATE DISPLAY > menu.

2.Turn the JOG dial until the cursor is next to “CLOCK LOCATION” and turn the SHUTTLE ring to the right.

•The sub-item will start flashing.

3.Check that the “ON” is flashing. Turn the SHUTTLE ring to the right.

•The monitor display switches to the display position setting menu.

<TIME DATE DISPLAY>￿	3￿
DISPLAY MODE
CHARACTER SIZE	SMALL￿
@CLOCK LOCATION	ON

ENGLISH

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

25