11.To set other programs, repeat steps 5 through 10.
•Up to 8 programs can be set per screen.
•To erase a program entry, press the “WARNING RESET” button during the programming procedure.
12.Turn the SHUTTLE ring to the right or press the SET UP button.
•Turning the SHUTTLE ring to the left moves the cursor to the previous entry. Pressing the SET UP button closes the <TIMER PROGRAM> menu.
13.Press the TIMER REC button.
•The TIMER REC indicator illuminate.
•If the current time is covered by a program, the unit will begin recording immediately.
•If the current time is not covered by a program, the unit will turn the power off and go into
•Operation can be shut down completely by pressing the TIMER REC button once more.
“SKIP”: This is set when timer recording is to be paused temporarily.Then the power will be switched off and the specified time period for that program number will not be recorded.
“POWER”: During the specified time, the power sup- ply is stopped in “ON” condition. This is used for execution of alarm recording during timer reserva- tion.
“ARC”(ARCHIVE): The recording contents of the HDD are backed up to the backup device.
“EJECT”: After backup of the recording contents of the HDD to the backup device, the medium is ejected automatically.
Estimating recording when using the Timer
Please note when using the Timer that there may be instances where, because of max recording fields, image quality, there is insufficient recording space on the unit’s hard disk drive to complete the Timer recording as programmed.
Please note that when the max recording fields setting differs on the NORMAL REC SETTING screen and TIMER PROGRAM screen, its possible record- ing duration will differ from the duration displayed in ESTD TIME on the NORMAL REC SETTING screen.
When setting the Timer for multiple programs, please refer to the Recording Time table on page 81 to con- firm the amount of hard disk space the recording du- ration will take up under different setting conditions.
<TIMER PROGRAM> | P2 | ||
DW | START | END | MODE |
1 DAY | 12:00 | 13:00 AÐ 25 | |
@DAY 16:00 22:00 AÐ12.5
3 ÐÐÐ ÐÐ:ÐÐ ÐÐ:ÐÐ ÐÐÐÐÐÐ
Using the Timer setting as an example of estimating possible recording duration, the chart on next column shows that everything is recorded on the 4th day, and on the 5th day only remain 7.8% of Program 2 content is recorded on the hard disk drive. (Conditions ; Image Quality is set to “HIGH”,
Program | Recording time | Possible duration for | HDD recording | |
for one day (A) | Consecutive Recording (B) | space (A/B) | ||
| ||||
|
|
|
| |
1 | 60 minutes | 1104 minutes | 5.4% | |
|
|
|
| |
2 | 360 minutes | 2209 minutes | 16.3% | |
|
|
|
|
♦Setting SPECIAL DW (special day of the week) By entering a program’s
Example: MON - FRI are designated as the days used in DEFINE P1.
The settings for the
1.Press the SET UP button to display the <MENU SETTING> menu.Turn the JOG dial to move the cursor to TIMER PROGRAM then turn the SHUTTLE ring to the right.
•The <TIMER PROGRAM> menu will appear.
2.Turn the JOG dial to move the cursor to DEFINE P1 then turn the SHUTTLE ring to the right to display the <TIMER PROGRAM> menu of P1.
<TIMER PROGRAM>
SELECTED PATTERN P1 @DEFINE P1
DEFINE P2
DEFINE P3
3.Turn the JOG dial to move the cursor to select “SPECIAL DW”, then turn the SHUTTLE ring to the right.
7 | SPL | 12:00 | 13:00 | A- | 25 |
8 | DAY | 13:00 | 14:25 | B- | 1 |
@SPECIAL DW:TUEÐFRI
4.Turn the JOG dial to select “MON” then turn the SHUTTLE ring to the right.
7 | SPL | 12:00 | 13:00 | A- | 25 |
8 | DAY | 13:00 | 14:25 | B- | 1 |
@SPECIAL DW:MONÐFRI
5.Turn the JOG dial to select “FRI” then turn the SHUTTLE ring to the right.
•The flashing will stop.
7 | SPL | 12:00 | 13:00 | A- | 25 |
8 | DAY | 13:00 | 14:25 | B- | 1 |
@SPECIAL DW:MONÐFRI
6.Press the TIMER REC button.
•The TIMER REC indicator will illuminate.
•If the current time is covered by a program, the unit will begin recording immediately.
•If the current time is not covered by a program, the unit will turn the power off and go into
•Operation can be shut down completely by pressing the TIMER REC button once more.
The unit will not record if there is an error in Timer settings. The following provides a list of measures for dealing with errors in Timer settings.
ENGLISH
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Operations |
51
