3.Turn the JOG dial to move the cursor ( ) to NORMAL REC SETTING then turn the SHUTTLE ring to the right.
•The <NORMAL REC SETTING> menu appears.
<NORMAL | REC | SETTING> | |
@IMAGE QUALITY | HIGH | ||
MAX REC FIELDS | 12.5F | ||
SELECT REC | MODE | (A) | |
DEFINE GROUP SETTING |
4.Check that the cursor is next to the IMAGE QUALITY and turn the SHUTTLE ring to the right.
•The sub-item of IMAGE QUALITY will start flashing.
<NORMAL | REC | SETTING> | |
@IMAGE QUALITY | HIGH | ||
MAX REC FIELDS | 12.5F | ||
SELECT REC | MODE | (A) | |
DEFINE GROUP SETTING |
5.Display STANDARD by turning the JOG dial then turn the SHUTTLE ring to the right.
•The flashing will stop. Now the setting has been completed.
<NORMAL | REC | SETTING> | |
@IMAGE QUALITY | STANDARD | ||
MAX REC FIELDS | 12.5F | ||
SELECT REC | MODE | (A) | |
DEFINE GROUP SETTING |
By turning the JOG dial, the im- age quality setting will be changed as below :
HIGH SUPERIOR BASIC
MEDIUM STANDARD
♦Setting the maximum recording fields
Example: Setting the maximum recording fields to “6.25F” (the default setting is “12.5F”).
1.After step 5 of IMAGE QUALITY setting procedures above, turn the JOG dial and move the cursor to “MAX REC FIELDS”.
<NORMAL | REC SETTING> | |
IMAGE QUALITY | STANDARD | |
@MAX REC FIELDS | 12.5F | |
SELECT REC MODE | (A) | |
DEFINE GROUP SETTING |
2. Turn the SHUTTLE ring to the right to flash the sub-item.
<NORMAL | REC SETTING> | |
IMAGE QUALITY | STANDARD | |
@MAX REC FIELDS | 12.5F | |
SELECT REC MODE | (A) | |
DEFINE GROUP SETTING |
3.Turn the JOG dial to display “6.25F” then turn the SHUTTLE ring to the right.
•The “6.25F” is now selected.
<NORMAL | REC SETTING> | |
IMAGE QUALITY | STANDARD | |
@MAX REC FIELDS | 6.25F | |
SELECT REC MODE | (A) | |
DEFINE GROUP SETTING |
By turning the JOG dial, the maxi-
mum recording fields setting will be changed as below:
25F | 12.5F |
| 8.33F | 6.25F |
| |
|
| |||||
1F | 2.5F | 4.17F | 5F |
|
| |
|
|
The underlined items cannot be selected when the MOTION DETECTION setting is active.
When MOTION DETECTION setting in the INI- TIAL SET UP menu is turned ON, the MAX REC
FIELDS for each time setting will be automatically altered as follows. These settings will not automati- cally revert to their former values even if MOTION DETECTION is turned OFF.
Case of <NORMAL REC SETTING> menu and <A-
“25F” } “12.5F”, “8.33F” } “6.25F” , “5F” } “4.17F”
Case of “MODE” in the <TIMER PROGRAM> menu. “25” } “12.5”, “8.33” } “6.25” , “5” } “4.17”
The setting you are making here is only for the nor- mal recording, NOT for the timer recording or alarm recording. You need to make the timer recording set- tings on the <TIMER PROGRAM> menu. And you need to make the alarm recording setting on the
The settings made for IMAGE QUALITY and MAX REC FIELDS are shared with A, B, and C of SE-
LECT REC MODE.
Press the SET UP button to exit settings.
4.Check the estimated recording time.
•After setting the image quality the <ESTD TIME> will be displayed. By changing recording settings, <ESTD TIME> will change its length of time (Alarm recording setting does not affect this setting).
<NORMAL REC SETTING>
IMAGE QUALITY | STANDARD |
@MAX REC FIELDS | 6.25F |
SELECT REC MODE | (A) |
DEFINE GROUP SETTING | |
| |
| |
| |
| |
1D12H11M | |
<ESTD TIME> |
The available recording time will be changed de- pending on the setting of the image quality and the
max recording fields. This estimated recording time display will include all HDD including external devices. For available recording time, please refer to “Record- ing time table” on pages 81.
♦Selecting the recording mode of the cameras There are 3 types of the recording mode : A, B and C. This setting is to choose the SELECT REC MODE on the <NORMAL REC SETTING> menu.
Example: Choose SELECT REC MODE (B) (the default setting is (A)).
1.After step 3 of MAX REC FIELDS setting procedures above, turn the JOG dial and move the cursor to “SELECT REC MODE”.
<NORMAL | REC SETTING> | |
IMAGE QUALITY | STANDARD | |
MAX REC FIELDS | 6.25F | |
@SELECT | REC MODE | (A) |
DEFINE | GROUP SETTING |
ENGLISH |
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• | Basic Operations |
13