Electrical Specifications

DC Electrical Characteristics (2.2 Vdc)

11.7 DC Electrical Characteristics (2.2 Vdc)

 

 

 

 

 

 

 

 

 

 

Characteristic

Symbol

Min

Typ

Max

Unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output Voltage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ILOAD = 10.0 μA

 

 

 

 

 

 

 

 

VOL

—

—

0.1

V

 

 

ILOAD = –10.0 μA

 

 

 

 

 

 

 

 

VOH

VDD– 0.1

—

—

 

 

Output High Voltage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(ILOAD –0.6 mA) Port A, Port B, Port C (1–7)

VOH

VDD– 0.3

VDD– 0.1

—

V

 

 

(ILOAD –8.0 mA) IRO

VDD– 0.3

VDD– 0.1

—

 

 

(ILOAD –1.2 mA) Port C (Bit 0)

 

VDD– 0.3

VDD– 0.1

—

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output Low Voltage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(ILOAD = 1.0 mA) Port A, Port B, Port C (1–7)

VOL

—

0.1

0.3

V

 

 

(ILOAD = 8.0 mA) IRO

—

0.1

0.3

 

 

(ILOAD = 7.0 mA) Port C (Bit 0)

 

—

0.1

0.3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input High Voltage

 

 

 

 

 

 

 

 

VIH

0.7 x

—

VDD

V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port A, Port B, Port C, IRQ, RESET, LPRST, OSC1

VDD

 

 

 

 

 

 

 

Input Low Voltage

 

 

 

 

 

 

 

 

VIL

VSS

—

0.4 x VDD

V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Port A, Port B, Port C, IRQ, RESET, LPRST, OSC1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Current (see Notes)

 

 

 

 

 

 

 

Run

 

 

 

 

 

 

 

 

 

—

0.3

1.0

mA

 

 

Wait

 

 

 

 

 

 

 

 

IDD

—

0.15

0.3

mA

 

 

Stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25 oC

 

 

 

 

 

 

 

 

 

—

0.1

1.0

μA

 

 

0 to +70 oC

 

 

 

 

 

 

 

 

 

—

0.1

4.0

μA

 

I/O Ports Hi-Z Leakage Current

IOZ

–4

—

4

μA

 

 

Port A, Port B, Port C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Current

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OSC1

 

–0.4

—

0.4

 

 

RESET,

LPRST,

IRQ,

 

 

 

 

PB0–PB7 with Pullups Enabled

IIN

 

 

 

μA

 

 

(VIN = 0.4 x VDD)

8

 

 

 

 

 

 

 

–25

–50

–105

 

 

PB0–PB7 with Pullups Enabled

 

 

 

 

 

 

 

(VIN = 0.7 x VDD)

 

 

 

 

 

 

 

 

 

–15

–34

–65

 

 

Capacitance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ports (as Input or Output)

COUT

—

—

12

pF

 

 

RESET,

 

LPRST,

 

IRQ

 

CINT

—

—

8

 

NOTES:

1.VDD = 2.2 Vdc ± 10%, VSS = 0 Vdc, TA = 0 °C to +70 °C, unless otherwise noted

2.Typical values at midpoint of voltage range, 25 °C only, represent average measurements.

3.Wait IDD: only core timer active

4.Run (Operating) IDD, wait IDD: Measured using external square wave clock source (fOsc = 4.2 MHz); all inputs 0.2 V from rail; no dc loads; less than 50 pF on all outputs; CL = 20 pF on OSC2

5.Wait, Stop IDD: Port A and port C configured as inputs, port B configured as outputs, VIL = 0.2 V, VIH = VDD –0.2 V

6.Stop IDD is measured with OSC1 = VSS.

7.Wait IDD is affected linearly by the OSC2 capacitance.

8.Pullups are designed to be capable of pulling to VIH within 25 μs for a 100 pF, 4-kΩload.

MC68HC05RC16 — Rev. 3.0

 

General Release Specification

 

 

 

MOTOROLA

Electrical Specifications

107